Launch event of the new 2026 Commander
As part of strengthening strategic partnerships among leading companies in the automotive sector, Saleh Cars Group, in collaboration with Petromin, hosted a distinguished official event to unveil the all-new Commander 2026 model.
The ceremony was attended by:
- Terence Patrick Perrin – Chief Executive Officer
- Rami Hankir – Senior Executive Director
- Elias Abu Hasira – Executive Director of Wholesale Sales
- Rohit Verma – Executive Director of Marketing
Alongside a number of automotive industry enthusiasts.
The event took place at Saleh Cars Group’s headquarters in Riyadh – Al Thumama Branch, at 3:30 PM on Tuesday, October 14, 2025.
The launch showcased the vehicle’s latest features and advanced technologies, reflecting both companies’ vision to deliver cutting-edge models to the Saudi market.
Engine Valves Explained Function and Common Issues
Table Of Contents:
|
Valves are among the most critical components of the internal combustion engine. But what exactly are they? And how can you maintain them properly?
What Are Engine Valves in a Car?
- Valves are metal components with a conical shape, installed in the engine head. They move in a reciprocating (up and down) motion to open and close the pathways for fuel intake and exhaust release.
- Their proper function is essential for sealing and unsealing these passages during engine operation.
How Do Engine Valves Work?
- Intake Phase: The intake valves open to allow the air-fuel mixture to enter the combustion chamber.
- Compression Phase: All valves close to compress the mixture before ignition.
- Power Phase: The spark plug ignites the mixture, pushing the piston downward.
- Exhaust Phase: Exhaust valves open to expel burnt gases from the combustion chamber.
How Many Valves Does an Engine Have?
- Older Engines: Typically have two valves per cylinder (e.g., a 4-cylinder engine = 8 valves).
- Modern Engines: Commonly feature four valves per cylinder (two intake and two exhaust). Some sports cars may even have five valves per cylinder.
What Is Variable Valve Timing (VVT)?
This technology enhances engine performance by intelligently controlling the timing of valve opening and closing. It helps to:
- Improve fuel efficiency
- Increase torque and reduce emissions
- Minimize engine noise
Symptoms of Faulty Valves in a Car
- Knocking or ticking sounds from the engine, especially at higher RPMs
- Loss of engine power due to poor compression
- Blue smoke from the exhaust (a sign of oil leaking into the combustion chamber)
- Excessive oil consumption without a clear cause
- Engine shaking during idle or startup
- Popping sounds from the exhaust due to incomplete combustion
Tips to Maintain Your Engine Valves
To avoid valve damage and ensure their longevity, follow these tips:
- Change engine oil regularly to maintain lubrication and prevent valve seal wear.
- Use high-quality oil recommended by the vehicle manufacturer.
- Avoid prolonged high-speed driving which can stress the valves.
- Inspect spark plugs regularly, as faulty plugs affect combustion and valve performance.
- Watch for unusual exhaust colors (like blue smoke) and consult a mechanic promptly.
- Perform regular cooling system maintenance, as overheating can lead to valve damage.
Gas pump problems and how to keep them from breaking down
Table Of Contents:
|
The Fuel Pump: The Heart of Your Car’s Fuel System, What Happens When It Fails? Discover the key symptoms of a failing fuel pump and maintenance tips before your car suddenly breaks down!
What is a Fuel Pump?
The fuel pump is a critical component in internal combustion engine vehicles. Its primary function is to deliver fuel from the tank to the engine. The pump ensures a steady and regulated flow of gasoline through the fuel system, maintaining engine efficiency.
How Does a Fuel Pump Work?
The fuel pump draws gasoline from the tank and pushes it through fuel lines to the fuel injectors (or carburetor, depending on the vehicle’s system). Some pumps are electrically powered, while others operate mechanically, but their goal is the same: to provide consistent fuel pressure that meets the engine’s demands during operation.
Symptoms of a Failing Fuel Pump
When the fuel pump malfunctions, several warning signs may appear, including:
- Engine Overheating: Poor fuel flow can disrupt combustion, causing the engine to overheat.
- Engine Jerking: Irregular fuel supply, especially at high speeds, leads to jerking or hesitation.
- Abnormal Acceleration: The engine may receive too much or too little fuel, causing sudden speed fluctuations.
- Strange Noises: Whining or buzzing sounds from the pump area indicate mechanical or electrical issues.
- Hard Starting: If the car requires multiple attempts to start, weak fuel delivery may be the cause.
- Reduced Performance: Insufficient fuel reaching the engine results in poor torque and sluggish acceleration.
- Sudden Engine Stalling: The engine may shut off while driving due to fuel cutoff.
- Increased Fuel Consumption: An inefficient pump can cause unexplained spikes in fuel usage.
If any of these symptoms appear, it’s advisable to have the vehicle inspected by a professional technician to prevent further damage.
Fuel Pump Pressure Issues
Engine performance depends on the fuel pressure supplied by the pump. If the pressure is too low or too high, it can lead to problems such as:
- Poor acceleration
- Engine choking or excessive fuel consumption
- Damage to fuel injectors or spark plugs
- Regular pressure checks are recommended, especially if you notice any performance issues.
Components of a Fuel Pump
The fuel pump’s components vary by vehicle but generally include:
Electric Motor: Powers the pump.
- Relay: Acts as an electrical switch controlling the pump’s operation.
- Centrifugal Unit: Pumps fuel from the tank to the engine.
- Fuel Filter: Cleans gasoline before it enters the pump.
- Valves: Prevent fuel from flowing back into the tank when the engine is off.
- Pipes & Connectors: Transport fuel from the pump to the injection system.
Tips to Maintain Your Fuel Pump
To extend the pump’s lifespan and avoid failures, follow these guidelines:
1. Avoid Driving on Low Fuel: Continuously low fuel levels can overheat and damage the pump.
2. Use High-Quality Gasoline: Contaminated fuel clogs filters and strains the pump.
3. Regular Inspections: Early detection prevents major breakdowns and costly repairs.
4. Replace the Fuel Filter Periodically: A clogged filter increases the pump’s workload.
Can You Drive with a Broken Sway Bar Link, Here's the Truth
Table Of Contents:
|
Did you know a small component in your suspension system could cause you to lose control of your car? The sway bar link plays a critical role in vehicle stability, so how can you tell when it starts to fail?
What is a sway bar?
Also known as a stabilizer link or anti-roll bar link, the sway bar link is a vital component of the vehicle’s suspension system. It connects the front and rear wheels and helps maintain balance during turns.
What is the function of the sway bar in a vehicle?
The sway bar enhances vehicle stability and reduces body roll while driving. Its key functions include:
- Reducing body roll during turns: When the vehicle enters a curve, its weight shifts outward, increasing pressure on the outer wheels and lifting the inner ones. The sway bar redistributes this pressure evenly across the wheels.
- Acting as a strong connecting rod between wheels: It transfers part of the force from the outer wheels to the inner ones, improving overall vehicle balance.
- Improving handling and reducing the risk of skidding: By minimizing body roll, the sway bar helps the driver maintain better control, especially at high speeds or on winding roads.
- Enhancing safety and passenger comfort: Its stabilizing effect contributes to a smoother, safer ride, benefiting both the driver and passengers.
What are the benefits of a sway bar link?
As a core part of the suspension system, the sway bar link significantly improves driving performance and safety. Its main benefits include:
- Minimizing body roll, especially during cornering
- Evenly distributing force between wheels, enhancing road grip
- Providing precise steering response in challenging conditions like sharp turns or wet roads
- Reducing vibrations caused by rough terrain or curves
- Improving weight distribution, reducing passenger discomfort from jolts or shakes
- Lowering the risk of rollover in sharp turns or at high speeds
- Supporting the overall performance of the suspension system
- Evenly distributing load across tires, reducing uneven wear and extending tire lifespan
- Reducing rolling resistance, which improves fuel efficiency and makes driving more economical
What are the symptoms of a faulty sway bar link?
A damaged sway bar link directly affects vehicle stability and safety. Common warning signs include:
- Excessive body roll during turns: The vehicle leans more than usual, making it harder to control and increasing the risk of skidding
- Unusual swaying on straight roads: Noticeable side-to-side movement may indicate a loss of balance
- Reduced steering responsiveness: The steering wheel feels less precise, especially when changing direction
- Clicking or squeaking noises near the wheels: These sounds often occur when driving over bumps or turning, suggesting worn rubber bushings or lack of lubrication
- Grinding or screeching sounds during braking or turning: This may point to abnormal friction in the suspension system
- Uneven tire wear: One side of the tire may wear out faster, or you may notice patches of worn and intact areas
- Persistent steering wheel vibrations at high speeds: A sign of imbalance in the suspension
- Intermittent vibrations over bumps or curves: Indicates instability or damage in suspension components
- Longer braking distances: The car takes more time to stop, compromising safety
- Difficulty maintaining a straight line: The vehicle may drift unexpectedly, requiring constant correction
What causes sway bar link damage?
The sway bar link, or stabilizer link, wears out over time due to various factors. Key causes include:
- Driving on rough or uneven roads: Repeated impacts can damage or break the link
- Severe vibrations from unpaved surfaces: These can accelerate wear and affect other suspension parts
- High-speed cornering: Puts excessive stress on the link, leading to faster deterioration
- Frequent sudden braking: Increases mechanical load, causing gradual wear
- Continuous exposure to moisture and road salts: Especially in coastal areas, this can lead to corrosion and eventual failure
How to inspect a sway bar link?
To check the condition of a sway bar link, follow these steps for a safe and accurate inspection:
- Lift the vehicle securely using a jack or lift stands. Ensure the car is stable and won’t move during inspection
- Look for visible damage: Check for cracks, breaks, or signs of wear on the link
- Inspect for fluid leaks: Leaks around the link may indicate internal damage
- Examine rubber bushings: Look for tears or deterioration that could affect performance
- Manually move the link: It should move freely without resistance or noise. Clicking or grinding sounds may signal damage
- Check connected components: Inspect control arms and ball joints for related wear or damage
Tip: If you're unsure how to perform the inspection, it's best to consult a qualified technician. Regular checks are recommended to maintain vehicle safety.
Can you drive with a damaged sway bar link?
- Driving with a faulty sway bar link is not recommended due to the serious safety risks it poses. This component is essential for maintaining vehicle balance and reducing body roll, especially during turns. When damaged, the car becomes more prone to skidding—particularly at high speeds or in poor weather conditions.
- Additionally, a worn sway bar link can cause uneven tire wear and negatively impact the suspension system’s overall performance. This compromises vehicle stability and increases the likelihood of accidents. Therefore, regular inspection and prompt replacement are crucial to ensure safe and reliable driving.
What is the ABS system in cars? How does it work and what are the signs of its failure?
Table Of Contents:
|
When you slam on the brakes and the car loses traction, the situation can quickly turn dangerous and may end in a complete skid. This is where the ABS system steps in as a lifesaving solution that restores control… but what happens if this system suddenly fails?
What Is the ABS System and Why Is It Essential for Vehicle Safety?
- The Anti-lock Braking System (ABS) prevents the wheels from locking up during sudden or hard braking.
- It helps reduce stopping distance and allows the driver to maintain steering control, especially on wet or slippery roads.
- ABS is considered one of the most important modern safety systems and plays a major role in reducing accidents caused by emergency braking.
Main Components of the ABS System
- Wheel Speed Sensors: Monitor the rotation of each wheel and detect any abnormal deceleration.
- Electronic Control Unit (ECU): Analyzes sensor data and makes split‑second decisions.
- Hydraulic Control Unit (HCU): Executes ECU commands by adjusting brake fluid pressure.
- High‑response Valves: Open and close rapidly to regulate hydraulic pressure.
- Hydraulic Pump: Restores pressure after it has been reduced to prevent wheel lockup.
How Does ABS Work During Emergency Braking?
- When the driver applies heavy braking, the wheel speed sensors send real‑time data to the ECU.
- If the ECU detects that a wheel is about to lock, it immediately commands a reduction in pressure on that wheel.
- Pressure is modulated through three repeating phases: hold – release – reapply.
- This cycle can occur up to 20 times per second, preventing skidding and maintaining vehicle stability.
How Can the Driver Tell if ABS Is Functioning Normally?
- Light vibrations or pulsations in the brake pedal during hard braking.
- A humming or clicking sound from under the vehicle during sudden stops.
- Slight pedal resistance, indicating that the system is actively preventing wheel lock.
Signs of ABS Failure
- The ABS warning light illuminates on the dashboard — the most common indicator.
- Increased stopping distance or the car skidding easily during braking.
- Abnormal vibrations or excessive stiffness in the brake pedal.
- Speedometer malfunction in some vehicles due to its reliance on ABS sensors.
- Unusual noises when pressing the brakes.
Common Causes of ABS Malfunction
- Damaged wheel speed sensors due to dirt, impact, or corrosion.
- Broken or worn wiring that disrupts signal transmission to the ECU.
- Weak or non‑functional hydraulic pump.
- Low brake fluid level or air trapped in the system.
- ECU failure caused by moisture or overheating.
How ABS Failure Affects Other Safety Systems
- ABS is interconnected with systems like Traction Control System (TCS) and Electronic Stability Control (ESC).
- A malfunctioning ABS may disable these systems as well, reducing vehicle stability in corners.
- Multiple warning lights may appear on the dashboard, confusing the driver and increasing driving risk.
Can You Drive With a Faulty ABS? And What Does Repair Cost?
Driving is still possible, but without the enhanced safety ABS provides — especially in emergencies.
The brakes will function normally, but you will lose steering control during sudden braking.
Repair costs vary depending on the issue:
- Cleaning or replacing a sensor: Low cost
- Repairing the ABS module: Moderate cost
- Replacing the entire ABS unit: High cost
Why Your Car Might Suddenly Emit Smoke: Understanding the Role of Freon and A/C System Efficiency
Table Of Contents:
|
Thick Smoke While Driving? Here’s What It Could Mean, You may suddenly notice thick smoke coming from your car while driving—an alarming sign that often indicates a technical issue. One possible cause involves your vehicle’s air conditioning system, particularly if it has a Freon leak or malfunction. But what exactly is Freon, and how does it work?
What Is Freon?
- Freon is the commercial name for refrigerants used in cooling and air conditioning systems, such as refrigerators and car A/C units.
- It is a type of halocarbon compound known for its ability to absorb heat and convert it into liquid form, which facilitates the cooling process for air and surfaces.
Freon’s Role in Your Car’s A/C System
Freon plays a crucial role in cooling your vehicle’s interior by operating as a thermal transfer medium in a continuous cycle:
1. Compression Stage
The compressor compresses Freon gas, increasing its temperature and pressure.
2. Condensation Stage
The high-pressure gas moves to the condenser, where it loses heat and becomes a high-pressure liquid.
3. Expansion Stage
The liquid passes through an expansion valve, where its pressure drops suddenly, causing it to evaporate and become a very cold gas.
4. Cooling Stage
This cold gas enters the evaporator, where it absorbs heat from the warm cabin air. The now-cooled air is circulated into the car interior.
5. Cycle Repeat
The Freon gas returns to the compressor, and the cycle continues.
This process is:
Dynamic and continuous while the A/C is running
Sealed with no expected Freon loss
Dependent on physical changes in the Freon between gas and liquid states
Powered by the engine, which drives the compressor
What Determines the Efficiency of a Car’s A/C System?
The system’s performance depends on:
- Correct Freon level
- Proper functioning of all system components
- The type of Freon used (e.g., R134a or R1234yf)
- Maintaining optimal system pressure, as recommended by the manufacturer
Types of Automotive Freon
1. R-12 Freon
Once common, R-12 was phased out after 1994 due to its harmful environmental impact when leaked.
2. R-134a Freon
A replacement for R-12, it is less harmful to the environment but slightly less efficient in cooling.
3. R-1234yf Freon:
Introduced around 2014 and widely adopted after 2021, this is the most eco-friendly option. It decomposes into non-toxic compounds within 10 minutes when released into the air and offers cooling efficiency similar to R-134a.
Symptoms of Low Freon in Your Car
1. Warm Air from A/C Vents, The most noticeable sign—reduced cooling efficiency or warm air blowing even with the A/C set to max.
2. Compressor Malfunction
With low Freon, the compressor may shut down to avoid damage. Signs include:
- Compressor not engaging
- Repetitive clicking or tapping sounds
- inactive magnetic clutch
- Pulley not rotating when A/C is on
3. Visible Freon Leak:
Freon is mixed with lubricant oil, so leaks often leave oily, dark, sticky stains near:
- Pipe connections
- Compressor joints
- Charging ports
- Condenser and evaporator fittings
4. Frozen A/C Lines, a drop in system pressure due to Freon loss can cause the evaporator or suction lines to freeze.
5. Increased Fuel Consumption, The compressor may run for longer or more frequently to compensate for poor cooling, placing extra load on the engine and raising fuel use.
6. Chemical Smell Inside Cabin, Large leaks can release a chemical, ether-like odor noticeable when the A/C is turned on.
7. Low-Pressure Warning on Dashboard, in modern cars with electronic monitoring, a dashboard warning may indicate low refrigerant pressure.
What to Do if You Suspect a Freon Leak
1. Turn off the A/C immediately to prevent compressor damage.
2. Visit a certified technician as soon as possible.
3. Don’t add Freon yourself without a thorough system check.
4. Repair any leaks before recharging the system.
5. Use only the manufacturer-recommended Freon type.
Does Freon Need Regular Replacement?
- Freon is designed to maintain its properties over time as it circulates in a closed system. Therefore, under normal conditions, there is no need to replace or recharge Freon periodically.
- However, if a leak occurs due to component failure, a recharge is necessary after repairs to restore system functionality.