Gas pump problems and how to keep them from breaking down

Table Of Contents:

  • What is a Fuel Pump?
  • How Does a Fuel Pump Work?
  • Symptoms of a Failing Fuel Pump
  • Fuel Pump Pressure Issues
  • Components of a Fuel Pump
  • Tips to Maintain Your Fuel Pump

 

The Fuel Pump: The Heart of Your Car’s Fuel System, What Happens When It Fails? Discover the key symptoms of a failing fuel pump and maintenance tips before your car suddenly breaks down!

 

What is a Fuel Pump?

The fuel pump is a critical component in internal combustion engine vehicles. Its primary function is to deliver fuel from the tank to the engine. The pump ensures a steady and regulated flow of gasoline through the fuel system, maintaining engine efficiency.

 

How Does a Fuel Pump Work?

The fuel pump draws gasoline from the tank and pushes it through fuel lines to the fuel injectors (or carburetor, depending on the vehicle’s system). Some pumps are electrically powered, while others operate mechanically, but their goal is the same: to provide consistent fuel pressure that meets the engine’s demands during operation.

 

Symptoms of a Failing Fuel Pump

When the fuel pump malfunctions, several warning signs may appear, including:

 

  • Engine Overheating: Poor fuel flow can disrupt combustion, causing the engine to overheat.
  • Engine Jerking: Irregular fuel supply, especially at high speeds, leads to jerking or hesitation.
  • Abnormal Acceleration: The engine may receive too much or too little fuel, causing sudden speed fluctuations.
  • Strange Noises: Whining or buzzing sounds from the pump area indicate mechanical or electrical issues.
  • Hard Starting: If the car requires multiple attempts to start, weak fuel delivery may be the cause.
  • Reduced Performance: Insufficient fuel reaching the engine results in poor torque and sluggish acceleration.
  • Sudden Engine Stalling: The engine may shut off while driving due to fuel cutoff.
  • Increased Fuel Consumption: An inefficient pump can cause unexplained spikes in fuel usage.

If any of these symptoms appear, it’s advisable to have the vehicle inspected by a professional technician to prevent further damage.

 

Fuel Pump Pressure Issues

Engine performance depends on the fuel pressure supplied by the pump. If the pressure is too low or too high, it can lead to problems such as:

  • Poor acceleration
  • Engine choking or excessive fuel consumption
  • Damage to fuel injectors or spark plugs
  • Regular pressure checks are recommended, especially if you notice any performance issues.

 

Components of a Fuel Pump

The fuel pump’s components vary by vehicle but generally include:

Electric Motor: Powers the pump.

  • Relay: Acts as an electrical switch controlling the pump’s operation.
  • Centrifugal Unit: Pumps fuel from the tank to the engine.
  • Fuel Filter: Cleans gasoline before it enters the pump.
  • Valves: Prevent fuel from flowing back into the tank when the engine is off.
  • Pipes & Connectors: Transport fuel from the pump to the injection system.

 

Tips to Maintain Your Fuel Pump

To extend the pump’s lifespan and avoid failures, follow these guidelines:

1. Avoid Driving on Low Fuel: Continuously low fuel levels can overheat and damage the pump.

2. Use High-Quality Gasoline: Contaminated fuel clogs filters and strains the pump.

3. Regular Inspections: Early detection prevents major breakdowns and costly repairs.

4. Replace the Fuel Filter Periodically: A clogged filter increases the pump’s workload.

 

FAQs

Related Blogs

Summer Car Care: Protecting Your Car in Saudi Heat

Summer Car Care: Protecting Your Car in Saudi Heat

Table Of Contents:

  • Why does your car need special care in the Saudi summer?
  • How do you protect the engine and cooling system from the heat?
  • How is the heat linked to a weak battery, and how do you look after it?
  • How do you keep the AC working efficiently in summer?
  • How do you protect the tires from hot asphalt?
  • How do you protect the paint and cabin from the sun?
  • What should you do if your car overheats while driving?
  • Frequently asked questions about summer car care

Summer car care means focusing on the systems that heat strains the most: check the cooling system and radiator coolant, the battery, tire pressure, AC performance, and engine oil before the peak of the heat, and protect the paint and cabin from direct sun. The Kingdom's long summer, with its high temperatures, dust, and desert trips, doubles the strain on the car, and most summer breakdowns can be avoided with a simple, regular review. In this guide, we show you what to check and how to act if a problem appears on the road.

Why does your car need special care in the Saudi summer?

Air and asphalt temperatures rise sharply in the summer months, so the car's systems work in harsher conditions than usual, and the strain on them increases with traffic, hours of AC use, and long trips.

  • The engine and cooling system work harder to get rid of heat, especially in traffic and during long stops with the AC running.
  • Heat speeds up the evaporation of battery fluid and the corrosion of its terminals, shortening its life even if it seems fine.
  • Hot asphalt raises tire temperature and internal pressure, and magnifies the effect of any weakness or crack in them.
  • Direct sun and dust affect the paint, dashboard, seats, and glass.
  • Any small fault becomes more serious in summer, because breaking down on a highway at midday is unpleasant and can be dangerous.

 

How do you protect the engine and cooling system from the heat?

The cooling system is the first line of defence in summer, and neglecting it is one of the most common causes of costly breakdowns in this season.

  • Check the coolant level in the reservoir with the engine cold, and never open the radiator cap while the engine is hot.
  • Use the type of coolant recommended in the owner's manual rather than plain water, and learn about the difference between red and green radiator coolant before topping up or mixing.
  • Look at the radiator hoses: cracking, swelling, or excessive softness are signs that they need replacing.
  • Make sure the radiator fan runs when the temperature rises or the AC is on, and clean insects and dust off the front of the radiator.
  • Keep an eye on the temperature gauge on the dashboard; if it rises repeatedly, read about the main causes of car engine overheating and deal with the cause early.
  • Stick to the engine oil change schedule in the owner's manual, as oil endures higher temperatures in summer and needs to be in good condition.

 

How is the heat linked to a weak battery, and how do you look after it?

Many people believe that batteries only struggle in winter, but summer heat speeds up their internal wear, and the weakness then appears suddenly at the first hard start.

  • Have the battery tested by a technician or parts shop before summer, especially if it has been installed for a long time.
  • Clean white or green corrosion off the terminals, and make sure the cables are tightened properly.
  • Watch for a slow-cranking starter or dim lights, as these are early signs of weakness.
  • Try to park the car in the shade whenever possible, as this reduces the heat in the engine bay.
  • To learn the signs in detail and ways to extend its life, see our article on car battery failure symptoms and how to extend its life.

 

How do you keep the AC working efficiently in summer?

In summer, the AC is not a luxury, and any weakness in it shows quickly as temperatures rise; servicing it early before the season is easier than repairing it at the peak.

  • When getting into a car that has been parked in the sun, open the windows slightly for the first minute to let the hot air out, then close them and switch on the AC.
  • Replace the cabin air filter on time, as a filter clogged with dust weakens airflow and causes an unpleasant smell.
  • If the air becomes less cold than usual, the cause may be low refrigerant, a leak, or a weak condenser fan, and it needs a technical check.
  • Pay attention to any strange noise when the compressor engages, or the engine stalling at idle with the AC on.
  • To understand AC faults and how to fix them in detail, read our article on the car air conditioning system and its faults.

 

How do you protect the tires from hot asphalt?

The tire is the only part that touches the hot asphalt directly, so it needs closer monitoring in summer, especially before a trip.

  • Check the air pressure in the morning when the tires are cold, and set it to the value on the driver's door sticker.
  • Do not let air out of a tire because it is hot after driving; the rise in pressure with heat is normal and accounted for.
  • Check the sidewalls for cracks or bulges, as old rubber is affected more by sun and heat.
  • Check the manufacturing date printed on the tire's sidewall, and consult a technician if the tire is old even if the tread looks good.
  • Do not exceed the car's permitted load on summer trips, as overloading raises tire temperature.
  • Do not forget to check the spare tire and the tools for changing it before any long trip.

 

How do you protect the paint and cabin from the sun?

Strong sunlight affects the car's appearance and value over time, and simple daily protection is better than repairs later.

  • Park the car in the shade or under a canopy whenever possible, and use a suitable cover when parking for long periods.
  • Place a sunshade on the windscreen to reduce cabin heat and protect the dashboard from cracking.
  • Suitable window tint reduces the heat inside the cabin and protects the seats; learn about how the right window tint protects your car.
  • Wash the car early in the morning or in the evening, and do not wash it while the surface is hot in the sun, so water spots do not remain.
  • Rinse the dust off with water first after sandstorms, and do not wipe it off dry so it does not scratch the paint.
  • Do not leave lighters, aerosol cans, plastic water bottles, or electronic devices inside the car, as extreme heat may damage them or make them dangerous.

 

What should you do if your car overheats while driving?

If you notice the temperature gauge rising or steam coming from the front of the car, acting calmly and quickly reduces the damage to the engine.

  1. Switch off the AC immediately; you can temporarily run the heater at its highest setting to draw some heat away from the engine.
  2. Stop in a safe place away from the traffic lanes, and switch on the hazard lights.
  3. Turn off the engine if the gauge keeps rising or steam appears, and do not keep driving with the gauge in the red zone.
  4. Do not open the radiator cap or the coolant reservoir while the engine is hot, and wait until it has cooled down completely.
  5. Once the engine has cooled, check the coolant level and look for an obvious leak, then head to the nearest workshop or call for help.

 

Frequently asked questions about summer car care

  • Does running the AC all the time harm the engine? No, if the cooling system is in good condition, but it adds load on the engine and battery, which is why maintenance matters more in summer.
  • Should I change the engine oil earlier in summer? Follow the schedule in the owner's manual, and use the severe-conditions schedule, if there is one, if you drive a lot in traffic and extreme heat.
  • Can I put plain water in the radiator when necessary? Only in an emergency and to reach the nearest workshop, then refill the system with the recommended coolant.
  • Can tires burst because of the heat? Heat alone does not usually cause this, but it multiplies the risk of underinflated, old, or cracked tires.
  • When should I check the car before a summer trip? A few days before the trip, so there is enough time to fix any issue with the cooling system, tires, or battery.

 

Summer in Saudi Arabia is a real test for every car, but most of its breakdowns start with small signs that can be noticed early. Review the cooling system, battery, tires, and AC before the peak of the heat, protect the paint and cabin from the sun, and never ignore the temperature gauge or any strange noise; with these simple habits, the summer months pass without surprises on the road.

What to Do After a Car Accident: Najm Reporting Steps

What to Do After a Car Accident: Najm Reporting Steps

Table Of Contents:

  • What should you do in the first minutes after a traffic accident?
  • What are the Najm reporting steps after an accident?
  • When should you call the traffic police instead of Najm?
  • How do you document the accident and the damage with photos?
  • What should you check on your car after a minor accident before driving on?
  • Why might sensors and cameras need calibration after a repair?
  • What should you follow up with Najm and the repair workshop after an accident?
  • What are the common mistakes after a traffic accident?
  • Frequently asked questions about traffic accidents and Najm reporting

If you are involved in a traffic accident, God forbid, start with safety: stop in a safe place, turn off the engine and switch on the hazard lights, place the reflective triangle at a safe distance, then photograph the accident from all directions and have your ID, driving licence and vehicle registration (istimara) ready. Then report to Najm on the toll-free number 199033 if there are no injuries and at least one party to the accident holds a valid insurance policy. If there are injuries, or an insurance policy is not available for every party to the accident, call the traffic police on 993, and call the ambulance on 997 when there are injuries. Below are the Najm reporting steps as the company publishes them, the cases it does not handle, and what to check on your car after the accident.

What should you do in the first minutes after a traffic accident?

Your safety and the safety of those with you come before anything else. Najm's car accident advice page (in Arabic) summarises the first steps as follows:

  1. Before getting out of the vehicle, make sure that leaving it will not put you in danger, and keep away from the lane of passing cars.
  2. Turn off the vehicle's engine and switch on the hazard lights to warn other drivers.
  3. If you have a reflective triangle, place it at a safe distance from the vehicle.
  4. Check on the people with you and those in the other car; if there are injuries, call the traffic police on 993 and the ambulance (Red Crescent) on 997.
  5. Stay at the accident scene and wait for the response teams to arrive, and avoid acting on any personal opinions or assessments from bystanders.

Najm's guidance explains that staying at the scene protects your rights and the rights of others, and that leaving it may expose you to additional violations and fines. If a fire breaks out, God forbid, it advises using the fire extinguisher safely, not using water to put the fire out, and turning off the engine and getting out of the vehicle.

 

What are the Najm reporting steps after an accident?

Najm's accident reporting procedures page (in Arabic) sets out what is needed to report after stopping in a safe place:

  1. Making sure there is valid insurance from a licensed insurance company.
  2. If the accident results from natural disasters or fire, you must have comprehensive insurance on the vehicle to report it to Najm.
  3. Preparing the official documents: ID, driving licence and vehicle registration (istimara).
  4. All parties involved in the accident must be present.
  5. Reporting the accident through one of Najm's channels, including the toll-free number 199033.

The company states that the Najm investigator uses a body camera to document the facts of the accident to protect the rights of all parties, and that it handles accidents without charging the parties to the accident. It also offers the Najm smartphone app for faster electronic procedures.

These procedures may be updated from time to time, so confirm the latest steps on Najm's website or official app before relying on them.

 

When should you call the traffic police instead of Najm?

Najm does not handle every accident; according to its official page, it does not take on the following cases:

  • No valid insurance for all parties to the accident.
  • An accident caused by natural disasters or fire when the vehicle has third-party insurance rather than comprehensive cover.
  • Injuries or a death, God forbid.
  • Criminal accidents.
  • One of the parties is absent or has fled the accident scene.
  • Accidents that happen outside the cities or geographic areas Najm covers.

These accidents can be reported to the authorities Najm lists. These are the contact numbers on its pages:

Authority Number What Najm's guidance says
Najm (toll-free number) 199033 Reporting the accidents Najm handles
Traffic Accidents 993 When there are injuries, or an insurance policy is not available for every party to the accident
Ambulance (Red Crescent) 997 When there are injuries
Unified Operations 911 Listed for accidents Najm does not handle
Civil Defense 998 Listed for accidents Najm does not handle
Road Security 996 Listed for accidents Najm does not handle

 

How do you document the accident and the damage with photos?

Najm advises photographing the accident from all directions so you can refer to it when needed. To make the photos genuinely useful, take them in this order, without standing in the traffic lane:

  • A wide shot from a distance showing where the cars are on the road, the lanes and nearby signals.
  • Photos of each car from the front, rear and both sides, then close-ups of every damaged area however small, such as the bumper, lights, wheels and mirrors.
  • A photo of the number plates of the vehicles involved, and of any parts scattered on the ground.
  • A photo of the ground under your car if you notice a fluid leak.
  • A photo of the dashboard if warning lights come on after the accident.
  • Keep the photos unedited, note the time and place of the accident, and photograph the damage again when the car enters the workshop.

 

What should you check on your car after a minor accident before driving on?

Once the procedures are finished, do not assume the car is sound just because the visible damage is small; a light impact can affect parts behind the bumper or the tyres. Check the following with the car parked in a safe place:

  1. Lights and indicators: switch on the headlights, rear lights, indicators and brake lights, and make sure they work and their lenses are not broken.
  2. Tyres and wheels: look for a cut or bulge in the tyre sidewall, a bent wheel, or a tyre rubbing against the wheel arch when you turn the steering.
  3. Leaks: look under the car, as radiator coolant, oil or a smell of petrol is a sign not to drive.
  4. Dashboard warning lights: start the car and notice whether a warning light stays on, such as the temperature, airbag or brake light, and learn its meaning in the guide to dashboard warning lights and their meanings.
  5. Body and doors: make sure the bonnet, boot and doors close properly, the mirrors are secure, and no part is hanging loose that could fall off while driving.
  6. The first short distance: drive slowly in a safe place, and notice whether the steering pulls to one side, or unusual vibrations or rubbing noises appear.

If the airbags deployed, you notice a leak or a smell of fuel, a red light stays on, or the steering feels abnormal, do not keep driving, and ask for a tow truck to take the car to the workshop.

 

Why might sensors and cameras need calibration after a repair?

Many modern cars place radar and parking sensors in the bumper or behind the front grille, and the driver assistance camera behind the windscreen. So repairing or replacing the bumper, replacing the windscreen, or adjusting the wheel alignment after an accident can change the angle of these sensors even slightly, and they then need calibration according to the manufacturer's instructions.

  • Ask the workshop before the repair: does the work include calibrating the sensors and camera after fitting?
  • After collecting the car, notice whether an error message appears for the assistance systems, warnings appear where they should not, or the parking sensor alerts disappear.
  • Do not rely on the assistance systems after the repair until you are sure they work normally.

You will find an explanation of these systems, the limits of their sensors and when they need calibration in our article on ADAS driver assistance systems.

 

What should you follow up with Najm and the repair workshop after an accident?

Najm's website offers services to follow up an accident after it has been handled, including:

  • Viewing your accidents and their details.
  • Issuing reports and documents.
  • Amending the accident data.
  • Objecting to the accident liability ratio, or adding damage or a party.
  • Browsing your insurance record and the information it provides about your claims, accidents and vehicles.

When the car is repaired, keep a copy of the report and photos of the damage before and after the repair, and review the quality of the bodywork and paint when you collect it; our article on what it means when a car has been repaired helps you notice colour differences and uneven gaps between panels.

 

What are the common mistakes after a traffic accident?

  • Getting out of the car into the traffic lane, or standing behind it without switching on the hazard lights and placing the reflective triangle.
  • Leaving the scene before the response teams arrive or before all parties are present.
  • Taking only a close-up of the damage without wide shots showing where the accident happened.
  • Driving on despite a leak or a red warning light.
  • Not having a fire extinguisher and a first aid kit in the car, both of which Najm advises keeping.

 

Frequently asked questions about traffic accidents and Najm reporting

  1. Do the parties to the accident pay for Najm to handle it? No, the company states that it handles accidents without charging the parties to the accident.
  2. Which documents are needed for the report? Your ID, driving licence and vehicle registration (istimara), and all parties to the accident must be present.
  3. Does Najm handle an accident caused by fire or a natural disaster? This requires comprehensive insurance on the vehicle; if it only has third-party cover, this is one of the cases Najm does not handle.
  4. What do I do if the other party flees the accident scene? A party being absent or fleeing is one of the cases Najm does not handle, and you can report through the authorities it lists, such as Unified Operations on 911 or Traffic Accidents on 993.
  5. How can I make sure a used car I plan to buy has not had a serious accident? Ask the seller about the car's history, have it inspected by a trusted inspection centre, look for signs of bodywork and paint repairs, and follow our vehicle inspection tips before buying a used car.

 

In short: your safety first, then the hazard lights and the reflective triangle, then the photos and documents, then reporting through Najm on 199033, or calling the traffic police on 993 when there are injuries or an insurance policy is not available for every party. Do not keep driving before checking the lights, tyres, leaks and dashboard warning lights, and make sure the sensors are calibrated after a bumper or windscreen repair.

Test Drive Before Buying a Car: Checklist and Comparison

Test Drive Before Buying a Car: Checklist and Comparison

Table Of Contents:

  • How do you prepare for a test drive before visiting the showroom?
  • What should you check before the car moves?
  • What is the right route for a test drive?
  • How do you test the air conditioning in Saudi heat during the drive?
  • How do you assess noise, visibility and parking?
  • How do you test family seating and luggage space?
  • How do you compare two cars after the test drive?
  • What are the common mistakes on a test drive?
  • Frequently asked questions about test drives

To get real value from a test drive before buying a car, ask to drive the same trim you plan to buy, and drive it on a route similar to your daily journeys: streets with speed bumps and traffic lights, a stretch of highway, and a place to park. Test the air conditioning, visibility, noise and family seating, and record your notes under the same items for every car. Budget, trims and the contract are covered in the new car buying guide.

How do you prepare for a test drive before visiting the showroom?

A successful test drive starts before you sit behind the wheel; good preparation makes you test what matters to you, not whatever catches your attention in the moment.

  1. Write a short description of how you will use the car: city journeys, a daily highway commute, intercity travel, passengers in the rear seats, or a tight parking space at home.
  2. Choose three priorities you will not compromise on, such as back comfort, easy parking and strong cooling, and make them the focus of your assessment.
  3. Ask the showroom in advance whether the model, trim and engine you are considering are available to test, how long the drive lasts, which route is available and which documents are required, and bring your driving licence.
  4. If the test car is a different trim, ask the team to explain the differences in engine, equipment, and wheel and tyre size, because they affect how the car feels and how much noise you hear.
  5. If you are comparing two cars, try to drive both on the same day and at a similar time, so the heat, traffic and road conditions are alike.

 

What should you check before the car moves?

Set aside a few minutes before driving off; much of what will bother you in everyday use shows up while the car is standing still.

  • Adjust the seat, steering wheel and mirrors, and check that you can reach the pedals comfortably without stretching your leg or sitting too close.
  • Stay seated for several minutes and notice whether the seat supports your back and thighs, or whether you keep changing position.
  • Make sure the instruments and the dashboard screen are readable in sunlight, and that the screen does not reflect on the windscreen.
  • Look at the front pillars and side sightlines: do they hide pedestrians or cars at junctions?
  • Pair your phone and set a navigation destination while parked, and try the air conditioning controls without looking at them for long.
  • Before handing the car back, unpair your phone and delete your data from the infotainment system.

 

What is the right route for a test drive?

If the showroom's arrangements allow it, ask for a route that resembles your daily driving instead of circling the building, and always keep to the speed limit and the accompanying employee's instructions.

  1. City streets with stop-and-go traffic: notice how smoothly the car moves off, how the transmission shifts and how the accelerator responds.
  2. Speed bumps and uneven asphalt: listen to the suspension, and notice whether the cabin shakes uncomfortably or the car absorbs bumps quietly.
  3. A roundabout or a series of bends: notice the steering weight and feel, and how much the car leans in corners.
  4. A stretch of highway: notice the car's stability, how easily it merges with traffic and overtakes, and the level of wind and tyre noise.
  5. A U-turn in a permitted place: it shows you how easy the car is to manoeuvre in narrow streets.
  6. Brakes: press them gradually as in normal use, and do not create a hazardous situation to test the brakes or driver assistance systems.

 

How do you test the air conditioning in Saudi heat during the drive?

Air conditioning is one of the most important things to test in the Kingdom's climate, but a short drive only gives a first impression and cannot prove cooling performance in every condition.

  • If possible, try the car after it has been parked in the sun, which is closer to your real use than a car pre-cooled inside the showroom.
  • Run the air conditioning at the setting you normally use, and notice when the air from the vents becomes cool and comfortable.
  • Notice whether cooling stays good when stopped in traffic or at a signal, not only while moving.
  • Ask about rear air vents, and ask your companion to assess the airflow reaching the rear seats.
  • Raise the fan speed and listen to it, as some cabins become noisy at high settings.
  • When comparing two cars, test the air conditioning in similar heat and at a similar time; otherwise, note the difference next to your observations.

 

How do you assess noise, visibility and parking?

These items are hard to judge from a specification sheet, but they become clear on a real drive.

  • Noise: talk to your companion in a normal voice on the highway, and notice whether you have to raise your voice because of the tyres, wind or engine.
  • Unusual sounds: if you hear a knock, squeak or vibration, ask about it and note it rather than diagnosing it yourself or treating it as a trait of every car of that model.
  • Rear visibility: notice the size of the rear window and how clear the mirrors are, and whether you need to turn your head a lot when changing lanes.
  • Camera and sensors: assess how clear the camera image is in strong sunlight, and how clear the sensor alerts are when approaching obstacles.
  • Parking: try reverse and parallel parking in a safe, permitted place, and notice how easy it is to judge the car's corners.
  • If your parking space at home is tight or its entrance is sloped, compare the car's published length and width with your space before the visit.

 

How do you test family seating and luggage space?

If the car is for the family, the opinion of whoever sits in the back matters as much as yours.

  1. Set the driver's seat to your position, then sit behind it and notice the room left for knees and head.
  2. Ask a family member to try getting in and out through the rear door, especially older relatives.
  3. If you have children, ask about the child seat anchor points (ISOFIX) and try fitting the seat with the showroom's agreement.
  4. In cars with a third row, try reaching it and folding the seats, and notice how much boot space remains.
  5. Put the pushchair or a suitcase in the boot, as written dimensions become clearer when compared with your own belongings.

 

How do you compare two cars after the test drive?

Write down your notes as soon as you step out of the car, before impressions get mixed up, and use a notes sheet with the same items for each car, like the table below:

Item What to notice Example of a useful note
Seating position Back comfort and ease of adjustment Comfortable on the highway, but the seat is low for my mother
Visibility Pillars, mirrors and rear window The front pillar hides part of the roundabout
Transmission and acceleration Smooth pull-away and overtaking Calm pull-away, slight hesitation when overtaking
Brakes and steering Pedal progression and steering weight Progressive brakes, light steering when parking
Noise Tyre and wind noise Tyre noise is clear on rough asphalt
Air conditioning Cooling speed and reach to the rear Cold while moving, slightly weaker at the signal
Parking Camera, sensors and judging corners Clear camera, but the front end is hard to judge
Family and boot Rear seats and luggage The pushchair fitted in the boot with space to spare

Give each item a score from one to five with a short reason, and give your three priorities more weight than the rest.

  • Do not judge by the total score alone; one car beating the other on an item you do not care about does not make up for weakness in a key priority.
  • Record the test conditions: the time, the heat, the route and the trim you drove.
  • If the two cars are close, ask for a second drive focused on the item that remains undecided.

 

What are the common mistakes on a test drive?

  • Settling for a short loop around the showroom that does not resemble your daily driving.
  • Driving a higher trim and assuming all its equipment comes with the trim you will buy.
  • Getting distracted by conversation or the screen while driving instead of focusing on the road and the car.
  • Comparing two cars driven in very different conditions without noting it.
  • Deciding in the first rush of excitement before calmly reviewing your notes.

 

Frequently asked questions about test drives

  1. How long should a test drive take? There is no fixed duration; what matters is that it is long enough for a route that resembles your use. A short drive may be enough to rule out a car, but it may not settle long-journey comfort.
  2. Should I test a higher trim if I plan to buy the base trim? It can still be useful if you know the differences, so match the engine, equipment and wheel size to the trim you want before relying on your impressions.
  3. Is a used car test drive different? Yes. In addition to the above, ask for the engine to be started cold, make sure the warning lights on the dashboard go out after starting, and do not rely on the drive alone; read our vehicle inspection tips before buying a used car.
  4. Should I take someone with me on the drive? A companion can assess the rear seats and notice what you might miss, after checking the showroom's policy on passengers.
  5. Do I have to decide on the same day? No. Review your notes once you are away from the showroom atmosphere, compare them with your priorities, then decide.

 

An organised test drive turns a general impression into information you can compare: prepare your priorities, choose a route that resembles your day, test the air conditioning, visibility, parking and family seats, and record everything under the same items. You can browse the cars available at Saleh Cars Group to compare models and trims, and contact the team to ask whether a test drive of the trim you are interested in is possible.

Fuel Economy Label: How to Read It and Calculate Fuel Use

Fuel Economy Label: How to Read It and Calculate Fuel Use

Table Of Contents:

  • What is a vehicle fuel economy label?
  • What information does the fuel economy label show?
  • How do you read the km/L figure and compare two cars?
  • How do you verify the label with the Taakad app?
  • How do you calculate the fuel you need each year?
  • How do you convert km/L to litres per 100 km?
  • Why does your real consumption differ from the label figure?
  • How do you measure your car's consumption yourself?
  • Frequently asked questions about the fuel economy label

To read a fuel economy label, start with the km/L value: the number of kilometres the car travels on one litre of fuel. The higher the number, the more economical the car. Next, make sure the label belongs to the exact model, model year and engine capacity you intend to buy, verify it through the Taakad app, and then divide your annual distance by the figure to estimate how many litres you will need each year. This guide explains the label's fields, how to compare and calculate with an illustrative example, and why your car's real-world consumption may differ from the printed figure.

What is a vehicle fuel economy label?

A fuel economy label is a sticker you will find on new cars. It shows the model's fuel economy value in kilometres per litre, together with a level that rates this value. According to the Saudi Press Agency report on the Letabqa energy conservation campaign, the label classifies cars into seven levels: Excellent+, Excellent, Very Good, Good, Average, Poor and Very Poor. The top levels appear in dark green and the lowest in red.

There are two types of label, depending on how the vehicle is used: one for passenger cars such as sedans and minivans, and one for light trucks such as four-wheel drives, pickups and cargo vans. Pay attention to the label type when comparing, and compare cars of similar size and use wherever possible.

 

What information does the fuel economy label show?

The label combines the vehicle's basic information with its fuel economy result. According to the same source, it includes:

  • The manufacturer's name and the vehicle's trade name (model).
  • Engine capacity and model year.
  • Vehicle type: passenger car or light truck.
  • The fuel economy value in kilometres per litre, and its corresponding level.
  • The required fuel type: 91 petrol, 95 petrol or diesel.
  • The logo of the Saudi Standards, Metrology and Quality Organization (SASO), the label's regulatory statement, and a QR code.

Before focusing on the number, match these fields with the car in front of you, especially the model year, engine capacity and fuel type. A single model may come with more than one engine or trim, and each may have a different value. Take a clear photo of every label so the details do not get mixed up if you visit several showrooms.

 

How do you read the km/L figure and compare two cars?

The km/L figure tells you how far the car travels on one litre. A value of 18 km/L, for example, means the car covers 18 kilometres per litre according to the label value. With this unit, the higher number is better. When comparing:

  1. Read the value itself rather than relying on the colour alone; two cars at the same level may have different values.
  2. Make sure both labels are of the same type, passenger car or light truck.
  3. Pay attention to fuel type; if one car needs 95 petrol and the other 91 petrol, calculate each car's cost using the price of its own fuel.
  4. Do not carry a value from one trim or engine to another version just because the trade name or exterior looks the same.
  5. Treat fuel economy as one factor alongside space, comfort, safety and maintenance; our guide to the best fuel-efficient cars can help you narrow your options.

 

How do you verify the label with the Taakad app?

The Saudi Standards, Metrology and Quality Organization provides the Taakad app for checking fuel economy label and energy efficiency label information, and it can be downloaded free for iOS and Android devices. The steps, as described on the app's page and in the previous source, are:

  1. Open the app, choose the vehicles section, and point the camera at the QR code on the label.
  2. If the vehicle is registered in SASO's database, its details will appear, such as manufacturer, engine capacity, model year, fuel type, body type, drive type, transmission, fuel economy value and level.
  3. Compare the details shown in the app with the label on the car, field by field.
  4. If there is no QR code on the label, use the app's search feature.
  5. If the details do not match, use the report feature, which takes you to the Commercial Report app.

 

How do you calculate the fuel you need each year?

The formula is simple: annual distance in kilometres ÷ fuel economy in km/L = estimated fuel in litres. To estimate your annual distance accurately, compare the dashboard odometer readings on two service records about a year apart, or take a typical week's distance and multiply it by the number of weeks in a year, then add the trips you know you will make.

Illustrative example: an annual distance of 20,000 km and two cars, the first rated at 15 km/L and the second at 20 km/L. These are hypothetical teaching figures only, not specifications of cars offered for sale.

Item First car Second car
Assumed fuel economy 15 km/L 20 km/L
Annual distance 20,000 km 20,000 km
Calculation 20,000 ÷ 15 20,000 ÷ 20
Estimated quantity About 1,333 litres 1,000 litres

The difference in this example is about 333 litres a year. To turn it into an amount of money, multiply each car's quantity by the price per litre of the fuel it needs at the time of comparison, then subtract the two results.

 

How do you convert km/L to litres per 100 km?

Some brochures, websites and dashboard displays show consumption in litres per 100 km, where the lower number is better. To convert, divide 100 by the km/L value; to convert back, divide 100 by the L/100 km value:

  • 15 km/L: 100 ÷ 15 = about 6.67 litres per 100 km.
  • 20 km/L: 100 ÷ 20 = 5 litres per 100 km.
  • In reverse: 5 litres per 100 km means 100 ÷ 5 = 20 km/L.

This unit reveals something many people overlook: the same increase in km/L saves more fuel when the starting value is low. In another illustrative example over 20,000 km, moving from 10 to 12 km/L saves about 333 litres, while moving from 20 to 22 km/L saves only about 91 litres. Do not compare a km/L figure with a figure in another unit, such as miles per gallon, before converting to the same unit.

 

Why does your real consumption differ from the label figure?

The label figure is a reference value that helps you compare models, but it does not describe your own driving style or road conditions. The main things that change real-world consumption are:

  • Driving style: sudden acceleration and braking, and high speeds on highways.
  • Heavy traffic and frequent stops, and leaving the engine running for long periods while parked.
  • Running the air conditioning for long periods in summer heat.
  • Excess load and low tyre pressure.
  • Maintenance condition, such as the air filter, spark plugs and engine oil.

Use the label for an initial comparison, then monitor your car's consumption over several refills. If consumption rises clearly and persistently above your usual level, read about the common causes of higher fuel consumption and arrange an inspection when needed, rather than assuming the label is wrong. If your car offers an economy driving mode, learn about the ECO system and whether it really saves fuel.

 

How do you measure your car's consumption yourself?

The most accurate home method is the full-tank method, and all you need is the dashboard trip meter and your fuel receipt:

  1. Fill the tank until the pump nozzle clicks off automatically, then reset the trip meter.
  2. Drive the car as usual until you need to refuel.
  3. Fill the tank again until the automatic click-off, and note the litres added and the distance on the trip meter.
  4. Divide the distance by the litres; if, for example, you drove 500 km and added 40 litres, your consumption is 12.5 km/L.
  5. Repeat over several refills and in different conditions, in the city and on the highway, then take the average.

The consumption reading on the trip computer is useful for daily monitoring, but it is an estimate and may differ slightly from the manual calculation, so rely on the manual calculation for long-term comparison.

 

Frequently asked questions about the fuel economy label

  1. Is a higher number on the label always better? Yes when the unit is km/L; with litres per 100 km, the lower number is better.
  2. Does the label guarantee the consumption I will get? No. It is a value for comparison, and your real consumption depends on driving style, roads, load and the car's condition.
  3. Does a larger tank mean better economy? No. Tank capacity determines the distance between refills, while fuel economy describes distance per litre.
  4. Can I compare a sedan with a four-wheel drive using the label? The unit is the same, so you can compare the two values, but each has a different label type, and the fairest comparison is between cars of similar size and use.
  5. What should I do if the label does not match the Taakad app? Ask the seller for an explanation, and use the app's report feature if the difference remains.

The fuel economy label is a quick comparison tool if you read it in the right order: match the details, verify them through the Taakad app, then turn the figure into litres that fit your distance. When you compare cars at Saleh Cars Group, ask for the label of the version that interests you and calculate your own needs before deciding.

Car Brand Logos and Names: A Guide to Badges in Saudi Arabia

Car Brand Logos and Names: A Guide to Badges in Saudi Arabia

Table Of Contents:

  • What are car brand logos and where do you find them on a car?
  • What are the best-known Japanese car brand logos?
  • What are the Korean car brand logos?
  • Which Chinese car brand logos are common in Saudi Arabia?
  • How do you recognise the new Chinese car brands?
  • What are the German and European car brand logos?
  • What are the American car brand logos?
  • Car brand logos table: brand, country of origin and badge description
  • Frequently asked questions about car brand logos

Car brand logos are the badges and names each manufacturer places on the front grille, the boot lid and the centre of the steering wheel, and the easiest way to learn them is to group them by country of origin: Japanese badges such as Toyota's three ovals, Korean ones such as Hyundai's slanted H, and Chinese brands, many of which spell out their full name in Latin letters, alongside German, European and American badges. In this guide you will find each brand's name as it is written and said, a short description of its badge, its meaning where it is documented, and a table for quick comparison.

What are car brand logos and where do you find them on a car?

A car badge (the logo or emblem) is the trademark that identifies the manufacturer, and it usually appears in several places:

  • The centre of the front grille or the bonnet, the most visible spot for the logo.
  • The boot lid, where the model name and sometimes the trim are usually written next to it.
  • The centre of the steering wheel, the wheel caps and the car key.

Badges fall into two types: a standalone symbol such as a star, rings or a lion, or a name spelled out in letters, as with many American and new Chinese brands, and knowing this difference helps you recognise a car from a distance.

 

What are the best-known Japanese car brand logos?

Japanese badges are very familiar on the Kingdom's roads, and most are simple symbols that are easy to remember:

  • Toyota: three ovals that form the letter T; the company says the two overlapping ovals represent mutual trust between the customer and the company, and the outer oval represents the global expansion of its technology.
  • Lexus: a curved letter L inside an oval; it is Toyota's luxury vehicle division.
  • Nissan: the name NISSAN across a thin circle; the name began as an abbreviation of the Japanese holding company Nihon Sangyo.
  • Honda: a wide, upright letter H inside a frame with rounded corners.
  • Mitsubishi: three red diamonds meeting at the centre, chosen by founder Iwasaki Yataro because they recalled the emblem of the Tosa clan that employed him and his own family crest.
  • Mazda: a stretched letter M shaped like wings inside a circle; according to the company's website, the name is also linked to its founder, Jujiro Matsuda.
  • Suzuki: a red letter S with sharp lines.
  • Isuzu: the name ISUZU in bold letters; the name comes from the Isuzu River and means fifty bells.

 

What are the Korean car brand logos?

  • Hyundai: a slanted letter H inside an oval; the Korean word means modernity.
  • Kia: the word KIA in a sharp, angular script; according to the company, the name means rising from Asia.
  • Genesis: two spread wings with a shield in the middle; it is the luxury brand of Hyundai Motor Group.

 

Which Chinese car brand logos are common in Saudi Arabia?

Chinese cars have become familiar in the Saudi market, and their best-known badges include:

  • Changan: a shape like the letter V inside a circle; the name comes from the Chongqing Changan Arsenal and literally means long-lasting peace.
  • Chery: an oval with a symbol resembling the letter A in the middle.
  • Geely: the name GEELY is written in Latin letters on the rear of many of its models.
  • Haval: the name HAVAL in large letters; it is a brand specialising in SUVs, owned by Great Wall Motor, which is named after the Great Wall of China.
  • MG: the letters MG inside an octagon; it is a British marque founded in Oxford and owned today by the Chinese company SAIC Motor.
  • BYD: the letters BYD in a bold typeface; the name had no particular meaning, and the company later adopted Build Your Dreams as a slogan matching its letters.
  • Hongqi: a vertical red strip running from the bonnet to the grille on many of its models; the name means red banner, and it is the oldest Chinese passenger car brand, owned by FAW Group.

 

How do you recognise the new Chinese car brands?

Many Chinese brands have appeared in recent years, some cannot be recognised from the badge alone, and here are practical ways to tell them apart:

  1. Read the written name: many new brands spell out their full name on the grille or the boot instead of a standalone symbol, such as Jetour, Omoda, Jaecoo and Deepal.
  2. Know the parent company: Jetour, Omoda and Jaecoo belong to Chery, Deepal to Changan, Haval to Great Wall and Lynk & Co to Geely, and brands within one group may share some models or platforms.
  3. Learn what the name means: Jetour combines the words jet and tour, signifying a convenient journey according to the brand; the O in Omoda comes from oxygen and moda means modern, according to Chery; Jaecoo comes from the German word Jäger, meaning hunter, and the English word cool; and Deepal's Chinese name means deep blue.
  4. Do not rely on the badge alone: some brands have changed their logo more than once, and its look may differ from one model year to another, so confirm the manufacturer and model on the car's registration card.
  5. Check the VIN: its first characters identify the manufacturer, and it is recorded on the registration card and stamped on the car's body.

 

What are the German and European car brand logos?

European badges often rely on old symbols with well-known stories:

  • Mercedes-Benz: a three-pointed star inside a circle, which for the original Daimler company symbolised Gottlieb Daimler's aim of motorisation on land, water and in the air.
  • BMW: a circle divided into blue and white quarters inside a black ring bearing the company name; its colours recall the flag of Bavaria, while the idea that it is an aircraft propeller is a myth.
  • Audi: four interlinked rings, each representing one of the four companies that joined to form Auto Union, Audi's predecessor.
  • Volkswagen: the letters V and W inside a circle; the German name means people's car.
  • Skoda: a winged arrow inside a circle; the arrow represents speed, the wings progress and freedom, and the eye precision; it is a Czech brand.
  • Peugeot: a lion; the original logo was a lion walking on an arrow, symbolising the speed, strength and flexibility of Peugeot's saw blades; it is a French brand.
  • Renault: a diamond-shaped lozenge that the French company has placed on the front of its cars since the nineteen-twenties.
  • Land Rover: a green oval carrying the name of the British brand.
  • Rolls-Royce: two interlocking letters R and the Spirit of Ecstasy mascot on the bonnet; the British company is a wholly owned subsidiary of the BMW group.
  • Lamborghini: a raging bull, chosen by founder Ferruccio Lamborghini after he admired the fighting bulls at the Miura ranch in Spain; it is an Italian brand.

 

What are the American car brand logos?

American badges tend towards written names and simple shapes:

  • Ford: a blue oval with the name Ford in white script.
  • Chevrolet: the gold bowtie, whose origin is unsettled; the company's account says William Durant took it from a wallpaper pattern in a French hotel.
  • GMC: the letters GMC, usually in red; it is a General Motors brand.
  • Jeep: the word JEEP in plain letters, and many people know it by its grille with vertical slots.
  • Dodge: the name DODGE in large letters on the grille or the rear.
  • Lincoln: a four-point star inside a frame; it is a luxury brand owned by Ford and named after US President Abraham Lincoln.

 

Car brand logos table: brand, country of origin and badge description

A quick summary of each brand's badge:

Brand Country of origin Badge description
Toyota Japan Three ovals
Nissan Japan Name inside a thin circle
Honda Japan Upright letter H
Mitsubishi Japan Three red diamonds
Hyundai Korea Slanted H in an oval
Kia Korea The word KIA in a sharp script
Changan China V shape inside a circle
Chery China A-like symbol in an oval
Jetour China Name in Latin letters
Haval China HAVAL in large letters
MG Britain (Chinese owner) MG inside an octagon
BYD China The letters BYD
Mercedes-Benz Germany Three-pointed star in a circle
BMW Germany Circle with blue and white quarters
Audi Germany Four interlinked rings
Volkswagen Germany VW letters in a circle
Peugeot France Lion
Ford USA Blue oval
Chevrolet USA Gold bowtie
GMC USA Red GMC letters

 

Frequently asked questions about car brand logos

  1. How do I tell the Hyundai logo from the Honda logo? The Hyundai logo is a slanted letter H inside an oval, while the Honda logo is a wide, upright letter H inside a frame with rounded corners.
  2. Which car has a horse, bull or lion logo? The black prancing horse on a yellow background is the logo of Italy's Ferrari, the horse inside a coloured shield belongs to Germany's Porsche, the raging bull to Lamborghini and the lion to Peugeot.
  3. Is a brand's country of origin the country where the car is made? Not always; the country of origin is the brand's home, and its models may be built in other countries, so check the manufacturing details in the VIN and the registration card.
  4. Why do companies change their logos? Usually when they renew their identity, as Nissan, Kia and BYD have done in recent years, so you may see two logos for the same brand on cars from different years.
  5. How can I confirm a car's brand if its badge has been replaced? Some owners fit modified badges or the badge of another model, so rely on the registration card and the VIN rather than the badge, especially when buying a used car.

 

Car brand logos become easier to remember when you link each badge to its country and parent company, read the name written on the boot when in doubt, and check the registration card and the VIN before any purchase decision. You can browse the cars available at Saleh Cars Group to get to know the different brands and models.

Vehicle Ownership Transfer on Absher: Steps and Conditions

Vehicle Ownership Transfer on Absher: Steps and Conditions

Table Of Contents:

  • What is the vehicle ownership transfer service on Absher?
  • What are the conditions for selling a vehicle on Absher?
  • What are the seller's steps to transfer car ownership on Absher?
  • What does the buyer do to complete the sale?
  • How do the seller's and buyer's tasks differ?
  • How do you transfer car ownership between family members?
  • What practical checks protect the seller and buyer before the sale?
  • What are the common mistakes in car ownership transfer?
  • Frequently asked questions about car ownership transfer

Vehicle ownership transfer in Saudi Arabia is done electronically through the vehicle sale service on the Absher platform, without visiting traffic offices: the seller enters the buyer's ID number and date of birth, the agreed sale price and the seller's bank account; the buyer then receives a notification of the request within one hour and accepts or declines it, transfers the price through Absher's secure payment system, insures the vehicle and pays the fees, and once the car is received, checked and the delivery is confirmed on Absher, ownership is officially transferred. Both parties must be registered on Absher, the vehicle registration (istimara), periodic inspection and insurance must be valid, and there must be no violations on the buyer or the vehicle.

What is the vehicle ownership transfer service on Absher?

The Ministry of Interior offers the vehicle sale service through the Absher platform, and the National Platform describes it as a service that enables individuals to sell their private vehicles and transfer ownership electronically after its dues are cleared, after reaching an agreement with the buyer and completing all required procedures, including vehicle inspection to ensure compliance with conditions, registering the vehicle under the buyer's identity, and issuing the vehicle registration license.

  • Target audience: individuals, both citizens and residents.
  • Service channels: the Absher website and its mobile app.
  • Service duration according to the National Platform: immediate.
  • Payment method: the car's price is transferred through Absher's secure payment system, and the service page on Absher explains that payment goes to an intermediary account dedicated to the service, which ensures the amounts are documented and the vehicle is received.

Procedures and conditions may be updated from time to time, so confirm the latest steps on the Absher platform or the National Platform before you start.

 

What are the conditions for selling a vehicle on Absher?

Before the seller starts the request, both parties should review the conditions listed on the service page on Absher, as failing to meet any of them may stop the sale:

  • Both the seller and the buyer must be registered on the Absher platform.
  • The vehicle must be in sound condition and not suspended, lost, wanted or impounded.
  • The vehicle registration license (istimara) must be valid.
  • The vehicle must have a valid periodic inspection.
  • The vehicle must have valid insurance.
  • There must be no violations on the buyer or on the vehicle.
  • The agreed price must fall within the limits set by the service, and the vehicle must be of a type the service allows to be sold.
  • Government fees are paid through the government payment system (SADAD).

The page also mentions limits on the number of vehicles of certain types that a resident may own, so review them on Absher if the buyer is a resident. If the periodic inspection is close to expiring, prepare the car early using the checklist on how to prepare your car for the periodic inspection.

 

What are the seller's steps to transfer car ownership on Absher?

After agreeing with the buyer on the price and other terms, the seller starts the request with these steps, as set out by the National Platform:

  1. Log in to the Absher platform.
  2. Go to vehicle services, then choose the vehicle sale service.
  3. Select the vehicle you want to transfer from the list displayed.
  4. Enter the buyer's information: ID number and date of birth.
  5. Enter the agreed-upon sale price.
  6. Add the seller's bank account details where the proceeds of the sale will be deposited.
  7. Carefully review the entered information, then confirm the request.
  8. Wait for the buyer's response: the buyer receives a notification of the transfer request within one hour and can accept or decline it.
  9. Once the buyer accepts the sale, both parties complete the delivery of the vehicle and the payment through Absher's secure payment system before the transfer is confirmed.

 

What does the buyer do to complete the sale?

Ownership does not pass to the buyer until they complete their steps on the platform, which according to the National Platform are:

  1. Review the Absher notification about the vehicle transfer request, and accept it within one hour if you agree.
  2. Carefully review the vehicle information and sale price before confirming your acceptance.
  3. Transfer the agreed amount to the seller's account through Absher's secure payment system.
  4. Insure the vehicle before the ownership transfer is completed.
  5. Pay the government fees and the Absher fees.
  6. Receive the vehicle and check it, then confirm delivery through Absher.
  7. Upon confirmation, the vehicle ownership is officially transferred from the seller to the buyer.

 

How do the seller's and buyer's tasks differ?

The table below summarises the role of each party at every stage of the sale:

Stage Seller Buyer
Before starting Agree on the price and terms, and check the istimara, periodic inspection and insurance are valid Register on Absher and make sure there are no violations on them
Creating the request Enter the buyer's ID, date of birth, price and bank account, then confirm Wait for the Absher notification
Responding Wait for acceptance or refusal Review the details and accept or decline the request within one hour
Payment Receive the price in the bank account entered in the request Transfer the price through Absher's secure payment system
Insurance and fees The platform lists no step for the seller at this stage Insure the vehicle and pay the government fees and Absher fees
Delivery Hand the vehicle over to the buyer after they accept the sale Receive and check the vehicle, then confirm delivery on Absher

 

How do you transfer car ownership between family members?

If you are handing your car over to a family member, Absher has a separate service called vehicle ownership transfer between family members, which allows vehicle ownership to be waived between family members electronically once the current owner and the new owner agree. The National Platform lists its steps as follows:

  1. Log in to the Absher platform, then select the required vehicle and the service dedicated to this.
  2. Select a first-degree family member: father, mother, brother, sister, husband, wife, son or daughter.
  3. Enter the confirmation code sent to the new owner's phone.
  4. Pay the service fees.
  5. The vehicle ownership is transferred to the new owner in the traffic systems after all requirements are met.

 

What practical checks protect the seller and buyer before the sale?

The platform organises the procedure, but it does not replace inspecting the car yourself; the service page on Absher states that the sale takes place after the vehicle has been viewed and inspected and the seller and buyer have agreed. Here are practical tips before accepting the request:

  • Match the chassis number (VIN) on the car with the istimara and the vehicle details shown in the request; the article on what the VIN characters mean explains where to find it.
  • Inspect the car in daylight and try the engine, transmission, air conditioning and tyres, or ask for a pre-purchase inspection at an independent inspection centre; you will find a wider list in vehicle inspection tips before buying a used car.
  • Look for signs of accidents and differences in paint shade between panels, and read what it means when a car has been repaired before you decide.
  • Check for violations through official channels such as Absher before starting the request, because the service requires no violations on the buyer or the vehicle.
  • Agree in advance on what the sale includes, such as the spare key, accessories and the service record if there is one.
  • Keep a private record of the agreement for yourself: the agreed price, the request date and screenshots of the request, and do not share these details publicly.

 

What are the common mistakes in car ownership transfer?

  • Starting the request before clearly agreeing on the price and other terms.
  • Entering the buyer's ID number, date of birth or the sale price without careful review before confirming.
  • Creating the request at a time when the buyer is not available, although the steps ask the buyer to review and accept it within one hour.
  • Overlooking the expiry date of the istimara, periodic inspection or insurance until the request stalls after the deal is agreed.
  • Transferring the price outside Absher's secure payment system, although the service steps state that payment is made through it.
  • Confirming delivery on Absher before actually receiving and checking the car.

 

Frequently asked questions about car ownership transfer

  1. Do I need to visit the traffic department to transfer car ownership? According to the National Platform, the vehicle sale service is completed electronically through Absher without the need to visit General Traffic Department offices.
  2. How long does the ownership transfer take? The National Platform describes the service duration as immediate; the buyer receives the request notification within one hour, and the sale is complete once both parties finish their steps and the buyer confirms delivery.
  3. Who pays the ownership transfer fees? The National Platform lists paying the government fees and Absher fees among the buyer's steps; check their current amount on the platform before you start.
  4. Can the sale be cancelled after the request is created? The buyer can decline the request when the notification arrives, and the service page on Absher states that in case of disagreement or unwillingness to continue, the sale can be cancelled before it is completed, according to the stage set by the platform.
  5. Does the buyer need insurance for the car? Yes. One of the buyer's steps is to insure the vehicle before the ownership transfer is completed.

 

Transferring car ownership through Absher is a clear process if you prepare for it: check the conditions, agree on the price, inspect the car before accepting, pay through the platform's secure payment system, and do not confirm delivery before checking the car. If you are looking for your next car, you can browse the cars available at Saleh Cars Group.