How to Prepare Your Car for the Periodic Inspection

Table Of Contents:

  • What is the periodic inspection and why prepare your car for it?
  • How do you make sure the lights and signals work before the inspection?
  • What should you check on the tires and brakes?
  • Do dashboard warning lights and exhaust smoke affect the inspection result?
  • What other parts should you review before the appointment?
  • What are the practical steps on inspection day?
  • What should you do if your car fails the inspection?
  • Frequently asked questions about the periodic car inspection

To prepare your car for the periodic technical inspection, check it yourself a few days before the appointment: make sure all lights and signals work, the tires and brakes are in good condition, the dashboard is free of warning lights, and no visible smoke comes from the exhaust, then fix any minor issue before you go. This quick review saves you the time of a re-inspection and reveals faults that affect your safety before they affect the result. In this guide, we present a practical, ordered checklist that you can apply at home or with a technician you trust.

What is the periodic inspection and why prepare your car for it?

The periodic technical inspection is carried out by accredited centres to confirm that the car is roadworthy and safe for its driver and other road users, and it usually focuses on the basic safety systems, emissions, and vehicle identity, not on appearance or extras. The checklist in this article is a general self-check and not an official list of inspection criteria; the approved requirements of the competent authority are always the reference.

  • Checking in advance reveals small faults such as a burnt-out bulb or a worn wiper, which are easy to fix before the appointment.
  • It reduces the chance of failing the inspection on the first attempt, and the repair and return visit for a re-inspection that follow.
  • It gives you a clear picture of the car's condition, especially if it is old or covers long distances.
  • The periodic inspection does not replace routine maintenance; the first checks the minimum level of safety, while the second preserves the car's life and performance.

 

How do you make sure the lights and signals work before the inspection?

Lights are among the most common and easiest faults to fix, and you can check them in minutes with the help of someone standing outside the car, or by parking in front of a wall in a shaded spot and watching the reflection.

  • Switch on the headlights in both low and high beam, and make sure both sides work with the same strength.
  • Test the front, rear, and side turn signals and the hazard lights.
  • Ask your helper to watch the brake lights when you press the pedal, including the high-mounted light if there is one.
  • Make sure the reversing light and the rear number plate light work.
  • If the headlight lenses are dull or yellowed, the light output may weaken, and they can be polished or replaced.
  • Watch out for modified lights or lights that do not match the car's original specifications, as they may cause a remark at the inspection.

 

What should you check on the tires and brakes?

Tires and brakes are what connect your car to the road, so they usually receive a careful check, and any fault in them directly affects stopping distance and the car's stability.

  • Check the tread depth by looking at the wear indicators inside the grooves, and replace the tire if the wear has reached them.
  • Look for cracks in the sidewalls, bulges, or cuts, as these are signs that the tire needs replacing straight away.
  • Set the air pressure to the value printed on the driver's door sticker; if you notice the pressure dropping repeatedly, read our article on low tire pressure causes, signs, and solutions.
  • Listen for any squealing or metal grinding when braking, and notice whether the car pulls to one side when you press the pedal.
  • Make sure the brake pedal feels firm, not soft, and that the handbrake holds the car on a slope.
  • If you notice any unusual symptom, see the signs of failing car brakes and deal with it before the appointment.

 

Do dashboard warning lights and exhaust smoke affect the inspection result?

Usually, yes; warning lights that stay on indicate a fault in a system, and thick smoke or a strong smell from the exhaust points to improper combustion whose effect may show up in the emissions test.

  • Start the car and watch the dashboard: the warning lights should go out a few seconds after starting.
  • If the check engine light stays on, have the cause diagnosed by a qualified technician; you can learn about the causes of the check engine light before visiting the workshop.
  • Also watch the brake, ABS, and airbag lights, as each of them is linked to a safety system.
  • Watch the colour of the smoke at start-up and when accelerating; thick blue or black smoke, or persistent white smoke, needs diagnosis, and you will find details in our article on the causes of thick smoke from a car.
  • Listen to the exhaust, as a sudden loud noise usually means a leak or a hole in the exhaust system.
  • Do not clear the fault codes from the car's computer or disconnect the battery right before the inspection to hide the light; this does not fix the fault, and the light may come back.

 

What other parts should you review before the appointment?

After the main systems, there are small details that many people overlook, even though they relate to safety and are easy to check.

  • Windscreen: large cracks, or cracks in the driver's line of sight, may cause a remark, so deal with them early.
  • Wipers and washer fluid: replace wiper blades that leave streaks, and fill the washer reservoir.
  • Side and interior mirrors: make sure they are intact, secure, and give a clear view.
  • Seat belts: pull each belt firmly and make sure it locks and retracts easily, and that the buckle latches securely.
  • Horn: make sure it works with a clear sound.
  • Steering and shock absorbers: excessive play in the steering wheel or knocking over bumps may indicate a fault in the suspension or steering.
  • Leaks: look under the car after it has been parked overnight, as oil or coolant spots need attention.
  • Plates and chassis number: make sure both number plates are clean and readable, and that the chassis number (VIN) is clear and not obscured.

 

What are the practical steps on inspection day?

After fixing the issues, what remains is organising the inspection day itself so that everything goes smoothly without unnecessary waiting.

  1. Book an appointment in advance through the approved official channels, and confirm the required documents from the same official source.
  2. Drive the car a reasonable distance before arriving so the engine is at its normal operating temperature.
  3. Make sure there is enough fuel so you do not have to stop or wait.
  4. Clear unnecessary items from the cabin and the boot, as the inspector may need to access some parts.
  5. Clean the outside of the car, especially the lights and number plates, so they are clearly visible.
  6. Keep a copy of the inspection report when finished, whether the car passed or not.

 

What should you do if your car fails the inspection?

Failing the inspection is not the end of the matter; it is a clear list of what needs fixing, and dealing with it calmly saves you time.

  1. Read the inspection report carefully, and separate the minor remarks from the faults that need a workshop.
  2. Fix every remark mentioned at a reliable workshop, and ask for an invoice that shows the work done.
  3. Avoid temporary fixes that hide the fault only for inspection day; they postpone the problem and may put you at risk.
  4. Ask the inspection centre about the re-inspection process and its time frame, and book your visit once you are sure every remark has been fixed.
  5. After the repair, repeat the same self-check before you go, as some repairs may reveal another issue close by.

 

Frequently asked questions about the periodic car inspection

  • When should I start preparing the car for the inspection? Ideally about a week before the appointment, so you have time to fix any issue or order a part that is not in stock.
  • Does a new car need preparation before the inspection? It is usually in good condition, but reviewing the lights, tires, and dashboard warning lights is still useful for any car.
  • Are small issues such as a burnt-out bulb worth fixing before the inspection? Yes, they are among the easiest and quickest repairs, and fixing them early spares you a remark that could have been avoided.
  • Is washing the engine before the inspection enough to hide a leak? No, washing does not treat the source of the leak; it is better to fix the cause itself.
  • Does the periodic inspection replace a pre-purchase inspection? No, a pre-purchase inspection is more comprehensive and looks at the condition of the engine, transmission, body, and the car's history.

 

Preparing your car for the periodic inspection does not require great expertise, just an organised review well before the appointment. Check the lights, tires, brakes, and dashboard warning lights, fix the minor issues yourself, and leave the deeper faults to a qualified technician; this way you pass the inspection more easily and, more importantly, you drive a safe car all year round.

FAQs

Related Blogs