Driving license renewal in Saudi Arabia is done electronically through the Absher platform under traffic services, without visiting traffic offices, provided you complete the regulatory requirements such as paying the fees and completing a medical examination. This electronic service covers private driving licenses and motorcycle licenses only, and the remaining validity of the license must be less than 365 days. This guide explains the requirements as shown on the official service page at the time of writing, the renewal and delivery steps, why a request may not proceed, and how it differs from renewing the vehicle registration (Istimara).

What Is the Driving License Renewal Service on Absher and Who Can Use It?

The driving license renewal page on the National Portal describes a service that lets individuals renew their driving license electronically, easily and efficiently, without visiting traffic offices. It lists the service duration as immediate and the delivery channels as the website portal and smartphone apps. The Absher service guide defines the beneficiary as a citizen or resident who is registered and activated on the Absher platform.

So first make sure your Absher account is active and that you can log in, then check your license type. According to the prerequisites tab, the service covers renewing private driving licenses and motorcycle licenses only. If your license is of another type, do not assume this service will accept it; ask the official traffic channels about the right procedure for your case.

 

What Are the Published Driving License Renewal Requirements?

The official service page lists the following requirements. Use the table as a checklist before logging in to Absher, while following what the service displays for your case when you apply. Requirements may be updated, and the service page at the time you apply is the reference.

Requirement as Shown on the Service Page	What to Check Before Starting
A private or motorcycle driving license	The license type recorded in your details
Payment of license renewal fees through government payments via banks	That payment was actually made for the correct service, not just that a payment screen was opened
Payment of traffic violations, if any	The status of any violations recorded against you before applying
Remaining license validity of less than 365 days	Your expiry date, using the driving license information service
A medical examination through a certified medical center	That the examination was done at a certified center

The required documents tab repeats payment of any violations, payment of the renewal fees and the medical examination, and does not mention uploading photos or extra papers. Do not rely on circulated lists that add unpublished documents. If you have violations, review how to check and pay traffic violations before starting the renewal.

 

What Are the Steps for Driving License Renewal on Absher?

The following steps are taken from the service page on the National Portal. If the menus look different in your interface, look for the driving license renewal service under traffic services, and do not choose a similarly named service such as vehicle registration renewal.

1. Log in to the Absher platform.
2. Select “My Services”.
3. Choose “Traffic” from the services list.
4. Select the “Renew Driving License” service.
5. Read the service description, terms and conditions, then select “Next”.
6. Review your personal information, specify the renewal period (2 years, 5 years or 10 years), then select “Confirm Renewal”.
7. Fill in your National Address details for license delivery.
8. Review the entered data.
9. Pay the delivery fees using a card (Visa, Mada, Mastercard).
10. A message confirms that the driving license renewal is completed.

Note that the payment inside these steps is for delivery. For the renewal fees themselves, the prerequisites tab says they are paid through government payments via banks. This guide does not state amounts for any period; follow what the service shows for your case. Before filling in the address, make sure your National Address is correct, because it is used for the license delivery request.

Closing the screen or completing a payment alone does not prove the renewal is complete. Check for the success message, then review your license details before repeating any step if your session was interrupted.

 

Why Can License Renewal Fail to Proceed, and What Should You Check?

The service page does not publish a list of error messages, but the published requirements help you identify which item to review. Always start with the text of the message shown in your account, then compare it with the following possibilities:

• The remaining validity of the license is not less than 365 days; check the expiry date through the driving license information service.
• The renewal fees have not been paid or the payment has not appeared yet; review the transaction status and receipt before paying again.
• There are unpaid traffic violations; do not assume that filing a dispute replaces this requirement before its outcome is clear.
• There is no medical examination from a certified medical center.
• The license type is not covered, because the service is limited to private and motorcycle licenses.
• The account is not registered or activated on Absher, since the service guide defines the beneficiary as a registered and activated user.

If the message is unclear, note its text, the time of the attempt and the stage where you stopped, then contact the official support channels shown on the service page. Never share your password or verification code with anyone, and do not treat a failed attempt as a final rejection without confirmation from the competent authority.

 

How Does Driving License Renewal Differ From Istimara Renewal?

The two documents are often confused because both are called a license. The driving license belongs to the driver, while the Istimara is the vehicle registration and relates to the car itself. Each therefore has its own Absher service and its own requirements, so do not apply the conditions of one to the other.

The medical examination and the remaining license validity are published requirements for driving license renewal and have nothing to do with the condition of your car. If what you need to renew is the vehicle document, follow the guide to vehicle registration renewal on Absher and why it may fail, which explains that service’s requirements and steps.

Likewise, vehicle insurance does not appear among the driving license renewal requirements on the service page. If you are reviewing your car insurance at the same time for other reasons, read about comprehensive versus third-party car insurance to choose a suitable policy.

 

Frequently Asked Questions About Driving License Renewal

Can I renew my driving license without visiting a traffic office?

Yes, according to the official service page: the service is electronic through Absher without the need to visit traffic offices, provided the regulatory requirements are completed. If your case cannot proceed, follow the service message and the competent authority’s guidance.

How early can I renew my license before it expires?

The prerequisites tab requires the remaining validity of the license to be less than 365 days. You can check your license validity electronically through the driving license information service listed among the related services.

Is a medical examination required for driving license renewal?

Yes. The official page lists a medical examination through a certified medical center among both the prerequisites and the required documents. Complete the examination at a certified center before starting the service.

What renewal periods are available?

The service steps mention choosing the renewal period of 2 years, 5 years or 10 years while reviewing your details. Choose from the options shown to you and review what applies to each option as displayed in the service.

How do I receive my license after renewal?

The steps include filling in your National Address details for license delivery and then paying the delivery fees by card. The National Portal also lists a digital driving license display service among the related services, which is separate from renewal.

 

Conclusion

Prepare the driving license renewal requirements first: pay the fees and any violations, complete the medical examination at a certified center, and confirm that the remaining validity meets the published condition. Then follow the steps on Absher and check for the success message. If the request cannot proceed, address the item identified in the message or request clarification through the official channels.

Overheating without coolant loss is possible: coolant visible in the reservoir does not prove that it circulates through the engine or releases heat effectively. The fault may involve coolant flow, airflow or cooling controls, and the temperature reading itself may also need checking. If an overheating warning appears, stop somewhere safe, switch off the engine and request assistance. Do not keep driving because the reservoir looks full.

Overheating Without Coolant Loss: What Does a Stable Level Mean?

The everyday expression water level refers here to engine coolant, not a recommendation to use plain water. This article focuses on a level that appears normal despite an overheating warning. For the wider picture, see the guide to engine overheating causes and what to do.

The reservoir’s role and the method for reading its level depend on the cooling-system design: it may be a pressurized part of the system or a recovery tank. Coolant also expands when hot, so comparing a hot reading with a cold one cannot establish system health. A visual reading within the marks on a cold engine, following the manual, tells you only about the level. It does not prove that passages are free of air or restrictions, or rule out a fault or a leak whose effects are not yet apparent.

How Can the Engine Overheat When Coolant Is Present?

The cooling system must move heat away from the engine and then transfer it to the air through the radiator. A failure at either stage can raise the temperature without an obvious drop in level. These are possibilities for inspection, not a shopping list of replacement parts:

• Fan or fan control: insufficient air may pass through the radiator while stationary. Seeing a fan turn once does not prove that its speed or all operating modes are correct.
• Thermostat: if it does not regulate coolant passage correctly, heat transfer to the radiator may be impaired despite an apparently adequate amount in the reservoir.
• Trapped air: air can interfere with coolant movement and heat transfer, particularly if the problem started after cooling-system work. The timing is a clue for the technician, not proof of a diagnosis.
• Insufficient pumping: the water pump may not provide the required flow. This does not necessarily produce a visible leak or an obvious noise that the driver can identify.
• Restricted heat exchange: internal restrictions in radiator passages or an external obstruction to airflow can reduce cooling. Reservoir level cannot distinguish between them.
• System pressure: a fault in the cap or components that retain pressure can affect the coolant’s resistance to boiling. Never test a cap by removing it while hot or guess at a different pressure rating.

For an explanation of circulation specifically, read about the water pump’s role in circulating coolant. Mentioning the pump does not make it the most likely cause in your car, and replacing it without checking the rest of the system may not solve the problem.

What Can Traffic and Highway Patterns Tell You?

Record only the conditions you already observed during previous use. Do not drive again or leave the engine running to reproduce overheating. The pattern can help a workshop organize its checks, but it is not a conclusive diagnosis:

Previous observation	What might the technician check?	What does it not prove?
Temperature rises at a stop and eases when moving	Airflow, fan performance and fan control	It does not prove that only the fan is faulty
The warning appears on the highway or uphill	Coolant flow and heat exchange under load	It does not identify the pump or radiator specifically
It began after a coolant change or repair	Correct filling, trapped air and connections	It does not confirm trapped air without checks
It coincides with air conditioning use	Cooling performance as load and airflow change	It does not prove low AC refrigerant

If the connection with AC use is your main observation, there is a separate explanation of engine overheating when the air conditioning is on. The key point here is that a normal coolant level cannot rule out a cooling fault, whatever the conditions when the warning appears.

Could the Temperature Reading Be Wrong?

A temperature sensor, its wiring or the display system may affect the reading. However, do not assume the warning is false because the reservoir is full or you cannot see steam. Some cooling faults show no obvious external sign at first. Treat the warning seriously until a qualified technician verifies the actual temperature and readings.

The technician compares diagnostic data and appropriate measurements with the vehicle’s specifications and operating conditions. A fault code alone cannot condemn a part, and the absence of a code does not prove that cooling is normal. There is also no single operating temperature for every car. Use the owner’s manual and vehicle-specific service information to interpret the gauge and warning message.

What Should You Do Safely When the Warning Appears?

1. Move to the nearest safe stopping place away from traffic and use hazard lights as needed. Stop and switch off the engine. Do not try to drive to a workshop with an overheating warning.
2. Stay clear of steam and spraying fluid. Never open a hot radiator or coolant reservoir cap, and do not assume that pressure has disappeared just because the gauge has fallen.
3. Do not work near fans or put hands or tools in their operating area: a fan may start automatically even after the engine is switched off. Do not test it by hand or touch hot hoses.
4. Do not pour cold water onto a hot engine or add fluid to a hot system. Request roadside assistance and arrange transport for inspection rather than repeatedly restarting the engine to see what happens.

Once the engine has cooled completely, you may record the level visible from outside the reservoir if this is possible and safe according to the manual, without removing caps or parts. A normal level or a warning that disappears after shutdown does not establish that the fault has gone or that continuing the journey is safe.

What Information and Checks Should You Discuss With the Workshop?

Tell the technician when the warning appeared: while stopped, climbing or travelling. Mention any preceding service work or fluid addition. Describe the message and any smell or steam you noticed from a safe position. Photograph the dashboard only after stopping, and do not reproduce the fault for documentation.

• Ask for the coolant level, specification and system condition to be checked, rather than accepting the reservoir is full as the entire assessment.
• Discuss fan operation and control, thermostat and pump function, and radiator flow as indicated by the diagnostic findings.
• Leave pressure and cap testing and air-removal procedures to the technician, using tools and methods appropriate to the system design.
• Ask what evidence identifies the fault and which check verified the repair before the car is handed back.

If initial checks do not identify the cause, broader diagnosis may be necessary. Do not jump to a head-gasket diagnosis, or rule it or another internal fault out solely because the reservoir level is stable. Testing should determine the next step.

Why Is Adding Water Not a Universal Fix?

If the level is within the correct limits, adding fluid will not repair a fan or restore impaired flow, and may exceed the permitted fill level. Use coolant meeting the vehicle’s specification and the concentration stated in the manual. Plain water is not a universal substitute, and color alone does not establish compatibility. Read about coolant differences and choosing a suitable fluid for more context.

Do not mix unknown products or experiment with additives to treat overheating. Flushing and air removal are not identical procedures on every vehicle; leave them to a professional when technically justified. Maintaining the correct level matters, but it is only one part of system health, not a replacement for checking performance.

Frequently Asked Questions About Overheating With a Stable Level

Does a full reservoir mean the radiator is full?

Not necessarily; it depends on the system design and condition. The visible level alone does not prove correct filling or circulation, and never justifies opening a hot cap.

Does the absence of a leak rule out pump failure?

No. Leakage is not the only possible sign of a pump fault. Its ability to circulate coolant needs appropriate assessment, not just a look underneath the car.

Can I drive if the gauge drops after stopping?

A lower reading does not prove the fault has gone. After an overheating warning, do not resume driving to test the car; request assistance and inspection before using it again.

Should I remove the thermostat to solve the problem?

Do not remove the thermostat as an experiment: it is part of cooling regulation. A technician should assess it and fit the correct replacement if necessary.

Does overheating without coolant loss mean a faulty sensor?

No. The overheating can be real despite a stable level. Do not ignore the warning or disconnect the sensor; have the reading and system performance checked together.

Conclusion: Check Cooling Performance, Not Just the Level

A stable coolant level neither rules out overheating nor identifies its cause. Stop safely at a warning, switch off the engine, avoid hot caps and fans, and give your observations to a qualified technician. A sound repair starts with evidence of the fault, not extra water or random parts replacement.

To check car recalls in Saudi Arabia, enter the VIN on the official recall platform, then read the campaign details and follow the instructions for your vehicle. A matching model name or model year alone does not establish inclusion, and no result does not mean the car is defect-free. If a campaign applies, contact the responsible party named in it, ask about driving instructions and an appointment, and retain confirmation of the completed repair.

What are car recalls in Saudi Arabia?

A recall is an action to address an announced defect, not a general description of every problem a car develops. The Ministry of Commerce explains that its enquiry service checks whether products or vehicles are included in campaigns announced in cooperation with manufacturers and local agents. Start with the official source rather than a shared image or a message of unknown origin.

Refer to the Ministry of Commerce defective products enquiry service (in Arabic) for the service sequence: access the platform, enter the VIN or search for the product, then follow the campaign details and required actions. Do not assume a recall means replacing the car; the relevant action is the one specified for the campaign once its applicability to your vehicle is confirmed.

 

What should you prepare before a VIN recall check?

Have the vehicle identification number, or VIN, ready. Read it from a reliable document for the car or from the location identified in the owner’s manual. Do not substitute the registration plate number or another identifier simply because its name sounds similar. For help identifying it, see the guide to your vehicle identification number, then match the details to the actual car.

• Copy the complete number exactly and check the letters and digits before searching, especially when copying from an image or message.
• Keep the basic vehicle details and any recall notice you received so you can explain your enquiry clearly when making contact.
• If the number on a document differs from the one on the car, have a qualified party clarify the discrepancy before relying on the search result.

Do not send full images of your documents to untrusted accounts to make an enquiry. Start through the official channel and provide what the responsible party requests through its authorised contact method, without posting your details in public comments.

 

How do you search the recall platform?

1. Open the official defective products recall platform and find the vehicle or product checking field rather than only browsing the latest announcements.
2. Enter the VIN you checked and run the search. If the field rejects the entry, review the number and field instructions rather than guessing a replacement character.
3. Read the full result and open the details of any associated campaign. Note its reference if shown, the defect description and the required action.
4. Review the instructions, then contact the specified party to confirm VIN inclusion and arrange the next step, rather than choosing a contact from an unofficial advertisement.

Searching by product or brand name helps you find announcements, but it does not replace matching the individual car. Keep the date of your enquiry and a copy of the details for reference. Do not treat an old screenshot as a permanent answer about recalls, particularly when a new notice arrives.

 

How should you interpret the search result?

Distinguish finding an announcement from confirming that your vehicle is included, and distinguish inclusion from actual completion of the required action. This table helps you choose the next step; it does not represent fixed status labels used by the platform:

What did you find?	What should you do?
An announcement naming your car model	Match the VIN and check the campaign scope before assuming it applies to your car.
A result indicating that the vehicle is included	Read the campaign instructions and contact the party responsible for carrying out the action.
No result, or a search that could not be completed	Check the entry; if you have a notice or a specific concern, seek confirmation from the relevant party.
The seller says the repair was completed	Request the completion document and match it to the VIN and the relevant campaign.

The absence of a recall result does not guarantee safety or replace an inspection when there are unusual symptoms. Likewise, do not attribute a noise or vibration to a campaign simply because its description seems similar. Diagnosing a fault requires a professional, while the enquiry answers a different question: whether the car is included in the campaign.

 

What should you do if your car is included?

Read the full defect description, risk and instructions before planning a trip to a service centre. There is no single driving recommendation for every campaign. If the announcement specifies instructions about use or stopping, follow them. If anything remains unclear, ask the responsible party how to handle and transport the car before moving it.

• Provide the VIN and campaign reference, and ask for confirmation that the discussion concerns this specific car and action.
• Ask where the work takes place, how to book and what to bring, and confirm the instructions to follow until the appointment.
• Keep the contact and appointment details, and ask how to obtain written confirmation when the work is finished.

Do not deliberately try to reproduce the defect, dismantle a suspected component or cancel a warning to continue driving. If the action requires a part or technical work, do not assume that buying a replacement yourself closes the campaign. To understand parts choices outside this process, read the guide to genuine, aftermarket and used car parts; follow up recall work with the party responsible for it.

 

How do you follow up and keep proof of repair?

When collecting the car, request a document showing the work performed and its date, linked to the VIN and campaign. Check that the details concern your car, and ask whether the action is complete or another step remains. An appointment confirmation or service-centre visit alone does not necessarily show that the recall work is finished.

Keep the document with the vehicle records, a copy of the announcement and important correspondence. If a later search seems inconsistent with the completion document, show both to the responsible party and request clarification instead of assuming one overrides the other. If symptoms remain or a concern appears after the work, report it and request a technical assessment. Proof of campaign repair is not a certificate that the car has no other faults.

 

What should you check before buying a used car?

Add a check for open recalls, meaning those whose required action is not yet complete, to your pre-purchase checklist. Request the VIN, match it to the car and search for yourself rather than relying on a verbal assurance or an image for a similar vehicle. If the seller mentions a completed earlier campaign, request its document and review the VIN and work details.

If a campaign applies and completion is unclear, ask the responsible party what remains before deciding to buy or use the vehicle. Do not make a recall result a substitute for a technical inspection or a review of the car’s condition; combine it with these used car inspection tips before purchase. The aim is to establish what has been verified and what needs follow-up, not to obtain a comprehensive guarantee from one search result.

 

Frequently asked questions about car recalls

1. Is the car name enough to establish inclusion? Do not rely on it alone. Identify the vehicle using its VIN, then confirm campaign applicability with the responsible party if the result remains unclear.
2. Does no result mean the car is completely safe? No. The enquiry is not a comprehensive technical inspection and does not justify ignoring symptoms or warnings that need professional assessment.
3. Should I wait for a fault before making contact? Once inclusion is confirmed, follow the campaign instructions and contact the responsible party about the action without waiting for a noticeable symptom or trying to produce one.
4. Can I book any workshop to close the recall? Start with the party identified in the announcement and ask it to direct you to the place of service and explain completion confirmation, rather than assuming any independent repair is enough.
5. What should I keep after the action is completed? Retain confirmation linked to the VIN and campaign, the work date and important correspondence to make follow-up or explaining the car’s history when selling it easier.

 

Start with the correct VIN, read the full announcement and follow up with the responsible party until completion and documentation are clear. Make the enquiry part of caring for a car and checking it before purchase, not a replacement for a technical inspection or its specific safety instructions.

A Mojaz report helps you read a used car’s history through the records available; it does not deliver a final verdict on its condition. Start by matching the vehicle’s identity, then read mileage, accident and maintenance records chronologically and compare them with documents and the car’s current condition. No accident record does not mean accident-free, and missing mileage readings do not validate the odometer. Use the report to identify seller questions and professional inspection priorities before deciding to buy, not as a replacement for inspection.

What does a Mojaz report show, and what are its limits?

The official Mojaz homepage (in Arabic) says it brings together key historical vehicle data from official sources in one report. Its report outline lists vehicle information, odometer reading history, accident records, maintenance and repairs, warranty information, spare parts, vehicle reputation and related images.

These are section names presented by the service, not a promise that every section contains data for every car. Read what is actually available, and do not turn a blank field into a positive or negative finding. Likewise, do not infer a specific rating or acceptance standard from the vehicle reputation heading; use any accompanying explanation and ask about unclear descriptions before relying on them.

 

Start by matching the car and the report version

Before discussing findings, establish that the report belongs to the actual car being offered. Ask to see the full version rather than a cropped image of a reassuring section, and match its identification details to the vehicle documents and the car. Do not rely on a similar colour or general description, or dismiss an identification mismatch as a minor error without checking.

• Check the VIN if shown, comparing every character with the documents and its designated location on the car; seek professional help if anything is unclear.
• Note the report date if visible, distinguishing it from the event dates inside; a recent report may contain only an older record.
• Write down any data mismatch and ask for an explanation before evaluating mileage or accidents or concluding the agreement.

For identification details and their locations, see the guide to vehicle identification numbers, while paying attention to the name of each identifier in the document you are reading.

 

How do you read odometer records chronologically?

Read the date of each distance reading, not just the last number. Put the available readings in order from oldest to newest, then compare the latest with the car’s odometer during the viewing. Check measurement units first; do not directly compare figures expressed in different units. Your aim is to understand the sequence and identify questions, not estimate true mileage from cabin appearance alone.

1. Write the date and reading exactly as shown, distinguishing report information from something the seller says or a figure on an invoice.
2. If a later reading is lower than an earlier one, request a documented explanation and discuss possibilities with a professional; the inconsistency warrants a pause but is not a standalone diagnosis of tampering.
3. If there is a long gap, ask for documents covering that period; do not assume the car was unused throughout it.
4. If there are no readings at all, note that mileage has not been verified through this method instead of automatically accepting the current figure.

If the seller mentions an odometer replacement, ask for the work record and evidence of readings before and after replacement, if available. Do not fill a missing sequence with estimates or treat consistent readings alone as a guarantee that the entire usage history is known.

 

How should you interpret accident records and available images?

If an accident record appears, read its details as written and compare them with repair documents supplied by the seller. Do not reduce the assessment to a record count or label damage minor or severe without supporting information. A report may describe a historical event, while repair quality and present condition need an independent inspection.

If related images appear, check their connection to the event, the vehicle and their date whenever that information is available. A photograph does not reveal everything behind visible parts, and missing images do not rule out damage. Where structural repairs are suspected, request a specialist inspection. The guide to signs of bodywork and structural repairs can help you frame questions, not make your own technical verdict.

If no accident record appears, the accurate wording is: no event is visible in the data you are reading. Do not replace that with the car has never had an accident, or let that inference cancel the inspection or the request for repair documents.

 

How do you relate maintenance and repairs to current condition?

Read available maintenance and repair entries with their dates, comparing them with the seller’s invoices. Distinguish a record of past work from proof that the relevant system works well today. If a repair description recurs, ask what was done and what happened afterwards, without automatically assuming a particular fault or an unsuccessful repair.

Warranty information alone does not mean cover is active or transferable to you; verify the document and terms with the relevant provider. Equally, do not infer from a spare parts section that every component is genuine or in good condition. A missing maintenance record does not prove neglect, but leaves a question requiring documents and inspection.

Compare documented work with the appropriate owner’s manual requirements alongside a professional. Do not derive a new servicing schedule from the report or assume one completed job means all other scheduled work was done or related components are sound.

 

A reading checklist: information and limits of inference

Use this table to organise your notes; it is not a real sample vehicle report. Always distinguish what you read, what you still do not know and the next step needed to close that gap.

What you read	What it does not prove alone	Next step
Consecutive odometer readings	Complete mileage history	Compare with the odometer and documents
No odometer readings	Accuracy of current mileage	Seek more evidence and document the gap
An accident record	Current repair quality	Repair documents and specialist inspection
No visible accident record	An accident-free car	Professional body and paint inspection
Recorded maintenance work	The component’s condition today	Compare with the current inspection
Warranty information	Active cover for the buyer	Verify terms with the relevant provider

 

Which questions should you ask the seller?

Start with an open question about the car’s usage history, then address unclear report entries. Request specific answers that can be connected to documents; personal trust or numerous photographs are not substitutes for verification. Keep your notes separate from the original report so your interpretations do not become confused with its records.

• Is this the full version for this exact vehicle? Which documents support the details or explain a visible discrepancy?
• Has the odometer been repaired or replaced? Are invoices or saved readings available for periods with no visible record?
• Are you aware of body repairs, repainting or accidents not shown here? What work was done and which documents are available?
• Where was the most recent service performed, what was actually done, and which recommended jobs remain outstanding?
• Will you allow an independent inspection and a review of findings before agreement? How can your explanation of a record mismatch be documented?

 

What still needs inspecting before you decide to buy?

Give the professional your report and notes before inspection, and request an assessment of the current structure, mechanical and electrical systems and safety components. Do not simply seek confirmation of an existing impression: ask what was checked and what could not be verified. To organise the rest of the viewing, see the used car inspection tips before purchase.

If a material identity or mileage discrepancy appears, or a significant repair remains unexplained, postpone the decision until it is clarified. If the gap cannot be closed, treat it as unknown information rather than proof of sound condition. Once the technical assessment is settled, review the vehicle ownership transfer steps on Absher separately; a history report does not replace the sale procedures.

 

Frequently asked questions about reading a Mojaz report

1. Does no accident record mean the car is sound? No. It means an accident record is not visible in the available data you read. Body condition and repair quality still need inspection.
2. Does the report validate the car’s mileage? Available reading sequences help comparisons but do not guarantee a complete history. If readings are missing, mileage cannot be accepted on the report alone.
3. Is every section available for every car? Do not assume this from the section names on the website. Read the actual content and ask about missing information or unclear wording.
4. What if the report contradicts the seller? Identify the conflicting entry, ask for a document explaining it and show it to a professional. Neither ignore the conflict nor automatically turn it into an accusation.
5. Does a Mojaz report replace a technical inspection? No. A history report presents available historical information, whereas an inspection assesses current condition within its scope. Combine both with documents before deciding.

 

In short, read a Mojaz report as available evidence and open questions, not a certificate that the car has no defects. Match its identity, review the timeline and connect the findings with documents and an independent inspection. A stronger decision clearly distinguishes what is established from what remains unknown.

CVT vs automatic: neither is the best choice for everyone. What matters is how the car responds in your daily use, the transmission’s condition and its service history, not its name alone. You may prefer the continuous acceleration of the former or the distinct shifts of the latter. Before buying, identify the actual transmission, drive the car in suitable conditions and separate normal behaviour from a symptom requiring professional inspection. This is a buying comparison, not a blanket reliability verdict.

 

CVT vs Automatic: What Exactly Are We Comparing?

Here, CVT means a conventional design that continuously varies its transmission ratio using variable pulleys and a metal belt or chain, depending on its construction. Conventional automatic means a transmission with fixed gear ratios that shifts between them and uses a torque converter to transfer power between the engine and transmission. The comparison does not cover every technology described as automatic or erase differences within either family.

A torque converter alone does not identify the type: some CVTs also use one. Likewise, do not assume that an e-CVT in a hybrid is the same pulley-and-belt transmission. The term can describe a hybrid system that varies the relationship between engine speed and vehicle movement differently. Architectures vary between systems, so consult the description of the particular vehicle rather than relying on the letters.

For an introduction to other designs, read the guide to transmission types and how they work; here, the focus is what to observe and verify when choosing.

 

How Do Acceleration and Shifts Feel Different?

With a CVT, engine sound may rise and engine speed may stay relatively steady while the car continues gaining road speed. This can be part of ratio control, not sufficient evidence of transmission slip. Software may also simulate stepped shifts, so the tachometer alone cannot identify transmission type or establish its health. What matters is a predictable response appropriate to the driving situation.

In a stepped automatic, engine speed may fall on an upshift or rise when you request more acceleration. How noticeable each shift feels depends on calibration, the engine and cabin isolation. Not every perceptible shift is a fault, but repeated harsh jolts should not be accepted merely because the transmission is conventional. Compare with a healthy car of the same specification if possible and seek professional advice when unsure.

 

A Comparison Table for Setting Your Priorities

Comparison point	Conventional CVT	Stepped automatic
Acceleration	Continuous ratio changes, sometimes with simulated shifts	Shifts between fixed ratios with varying smoothness
Sound and feel	May hold higher engine speed during acceleration	Engine sound may change noticeably during shifts
Suitability check	Observe pull-away smoothness and whether the acceleration sound suits you	Observe shift timing and response to acceleration requests
Maintenance	Fluid specification and schedule depend on the particular transmission	Fluid specification and schedule depend on the particular transmission
Buying decision	Vehicle condition and use matter more than the label	Vehicle condition and use matter more than the label

 

Which Suits Traffic, Long Trips and Hills?

Describe your daily driving rather than ranking technologies from best to worst. In traffic, assess low-speed control and the transition between stopping and moving. On an open road, notice refinement at a steady speed and the response to moderate, legal acceleration. The engine, weight, accelerator calibration and insulation can influence your impression as much as transmission type, so do not attribute every difference to it.

If you regularly drive on hills or carry passengers and luggage, check load limits and driving instructions in the owner’s manual. Do not infer towing capability from the transmission name or test loads or gradients outside permitted limits. For fuel consumption, compare data for the exact trim and engine under comparable measurement conditions; a CVT does not guarantee lower fuel use on every trip.

 

What Should You Verify About Fluid and Service History?

Ask for invoices showing service dates, mileage and the fluid specification used, not merely a statement that the fluid was changed. Do not assume automatic transmission fluid suits a CVT or that all CVT fluids are interchangeable. The reference is the approved specification for that transmission and its correct service procedure. Transmission type alone cannot establish one fluid-change schedule for every car.

Discuss how your operating conditions affect the service schedule with a qualified provider, along with any documented repairs or leaks. Do not request an indiscriminate fluid change or flush as a cure for every vibration, and do not open hot components to inspect fluid yourself. Read about transmission fluid changes and care for general background, then give your vehicle’s manual priority over conflicting general advice.

 

A Pre-Purchase Checklist for Either Transmission

Treat the drive as a way to gather observations, not a certificate that the car is fault-free. Agree on a safe, permitted route and have a passenger take notes without distracting you. Do not deliberately overheat the transmission or use aggressive launches to expose faults.

1. Confirm the transmission in the actual vehicle’s specifications and production year. Advertisement wording and selector appearance are insufficient, and specifications may differ between trims.
2. Review the service history and any previous replacement or repair. Ask why the repair was needed and what was done; request documents rather than relying on verbal reassurance.
3. Start with gentle driving and observe pull-away, low-speed movement and gradual acceleration. Stay within speed limits and never watch the instruments at the expense of the road.
4. With the car fully stopped and the brakes applied, observe its response when selecting forward or reverse as instructed in the manual. Never switch direction while moving or repeat the manoeuvre aggressively.
5. Note whether the observation occurred at the start or after driving, with or without air conditioning, and whether it repeated under the same conditions. Do not set a universal delay threshold separating healthy from faulty.
6. Before a final agreement, arrange an independent professional inspection including an appropriate road test and electronic checks when needed, with an explanation rather than just a fault-code printout.

To compare comfort, visibility and the rest of the car as well, use the pre-purchase test drive checklist alongside these transmission-specific checks.

 

When Does an Observation Need Professional Diagnosis?

Repeated vibration, a noticeable response delay, a temperature warning or a sudden performance change deserves assessment, but none proves transmission failure by itself. The engine, its mounts or other systems may contribute. Describe when the symptom appeared rather than requesting transmission replacement based on a video or personal impression.

If a temperature warning or loss of drive affects safety, end the test in a safe place, follow the owner’s manual and seek appropriate help. Do not clear warnings or keep accelerating to test them. Read about transmission symptoms that warrant inspection to recognise possible observations, not to diagnose your car or assume one definite cause.

 

Frequently Asked Questions About CVT and Automatics

Does Steady Engine Speed Mean a CVT Is Slipping?

Not necessarily; acceleration can continue at nearly constant engine speed. A changed response with reduced drive or a warning needs professional assessment, not a verdict from the tachometer alone.

Does a Conventional Automatic Always Last Longer?

It is not sound to generalise lifespan or reliability across all designs. Condition, history, maintenance and use are essential when assessing an individual car.

Can Both Types Use the Same Transmission Fluid?

Do not assume compatibility from a fluid’s name or colour. Check the specification required for the exact transmission and have a professional follow its approved service procedure.

Is e-CVT the Same as a Belt CVT?

Not necessarily: similar names do not establish identical construction. Check the explanation of the hybrid’s system; systems described by this term do not necessarily share one design.

Is a Short Drive Enough to Establish Transmission Health?

No; some symptoms may not appear during a short drive. Combine it with service records and an independent inspection, especially when documents are missing or observations remain unexplained.

 

Conclusion: Choose the Right Car, Not Just a Label

Choose after defining your use, testing the response and verifying maintenance and inspection findings. Do not reject a CVT solely because it sounds different, or accept a conventional automatic with unexplained symptoms. A stronger decision combines driving suitability with documented condition and clear instructions for caring for the car.

Vehicle registration renewal is available electronically through Absher vehicle services once the service requirements are met and the automated eligibility check is passed. Start by reviewing insurance, technical inspection and any required payments, then select the vehicle, choose registration renewal and confirm the transaction. Istimara means the vehicle registration here, not the person’s driving licence. This guide explains what to prepare and how to handle a renewal that cannot proceed, without confusing renewal with ownership transfer or an inspection booking.

What Is Vehicle Registration Renewal on Absher?

Renewal extends the registration of a previously registered vehicle. The official vehicle registration renewal page on the National Portal explains that the service is available electronically through Absher without visiting traffic offices, and that eligibility is checked automatically against the service requirements. Reaching the vehicle screen therefore does not establish that renewal is complete.

When checking an expiry date, first identify the document: a driving licence relates to the driver, while vehicle registration relates to the vehicle. This distinction matters when researching requirements; do not apply driving licence renewal conditions to registration renewal. Follow the service name shown in your account rather than an old screenshot of a different menu.

 

What Are the Vehicle Registration Renewal Requirements?

The official service page lists the following requirements. Use them as a checklist before starting, while also referring to what the service displays for your vehicle when you apply. A receipt or an old copy of a document is not a substitute for checking its validity and that it relates to the intended vehicle.

• Valid vehicle insurance: check the coverage dates and vehicle details, not just the purchase notification.
• A valid technical inspection certificate: distinguish an inspection appointment from an existing valid certificate.
• Payment of renewal fees and any late-renewal penalty, as required by the service, rather than relying on a widely quoted amount.
• Payment of any traffic violations: check the payment status rather than assuming that starting a bank transaction completes the process.

The required-documents tab also specifies an existing vehicle registration. This guide does not add requirements to upload photographs or other documents simply because somebody else encountered them; follow what the service actually requests. Because renewal eligibility is checked automatically, verify availability in your account rather than deciding based on a date quoted in an unofficial explanation.

 

How Should You Check Insurance, Inspection and Violations?

Start with insurance: open the policy details and check that the policy is valid and covers the same vehicle. To distinguish the type of cover from the validity of a policy, read about comprehensive versus third-party car insurance. Choosing cover that fits your needs is different from checking a renewal requirement; the name of the cover alone does not establish that an application will be accepted.

Next, review the inspection certificate. If you need to prepare for an appointment, use the periodic vehicle inspection preparation checklist to organise technical checks, not as proof of passing. Inspection is a separate process with its own result, not a renewal-screen button that substitutes for a valid certificate.

Then review violations and any payment requirements displayed. The guide to checking, paying and disputing traffic violations explains the related services. Do not confuse filing a dispute with satisfying the renewal payment requirement; rely on the displayed status and the relevant authority’s instructions rather than assuming another action removed the obstacle.

 

What Are the Steps to Renew Registration on Absher?

The following route follows the official service instructions. Read the details on each screen before moving on. If the menus appear in a different order in your interface, look for vehicle registration renewal under vehicle services rather than selecting another service because its name is similar.

1. Log in to Absher through its official channel, then select Vehicles.
2. Select Manage Vehicles from the services menu and review the vehicles shown in your account.
3. Choose the vehicle whose registration you want to renew and check its details before proceeding.
4. Select Renew Vehicle Registration; the system automatically checks eligibility against the service conditions and requirements.
5. Review the information displayed, complete any requirements and select Confirm Renewal.
6. Check for the successful renewal message, review the updated registration details and retain any transaction reference displayed.

Payment alone, or closing the screen, does not prove successful renewal. If your session ends before the result appears, return to the vehicle details and check what actually happened before repeating the steps. The aim is to confirm that the correct vehicle’s registration was updated, not simply to complete a sequence of clicks.

 

How Do Renewal, Ownership Transfer and Inspection Differ?

These services may relate to the same vehicle, but each serves a different purpose. Use the table to identify your starting point, then review the relevant service conditions separately. Do not assume completing one also completes another.

Procedure	Purpose	What Does Not Prove Completion?
Registration renewal	Renew the vehicle registration	Buying insurance or booking an inspection alone
Ownership transfer	Transfer the vehicle to another owner	Registration renewal alone
Technical inspection	Inspect the vehicle and obtain its result	An appointment without the inspection taking place

If your aim is to sell or buy the vehicle, review the Absher ownership transfer steps and sale conditions instead of treating renewal as a substitute for transfer. Organise your notes under separate headings: registration status, insurance status, inspection result and transfer transaction status when relevant. This helps avoid confusing different documents.

 

Why Can Renewal Fail to Proceed, and What Should You Do?

An unmet published requirement is a possible reason renewal cannot proceed, but it does not explain every message. Start with the text displayed in your account and review the item it identifies, rather than repeating the request or changing several things without understanding the issue.

• If the message concerns insurance or inspection, match the vehicle and validity dates against the relevant document and contact its issuer if the information conflicts.
• If it concerns payment, review the requirement, transaction status and receipt before paying again. Do not assume an amount or reason that the screen does not state.
• If eligibility is unclear or the renewal option is missing, review the current service conditions and vehicle details, then ask official support for clarification.
• If a technical message appears without explanation, note its text, the time and the stage reached. Reopen the service to check the result; do not describe it as a final rejection without confirmation.

When contacting support, explain where the process stopped and which documents you checked. Never share your password or verification code, and hide personal details in any screenshot you post. This is a way to organise follow-up, not a guarantee of processing time or acceptance.

 

Frequently Asked Questions About Vehicle Registration Renewal

1. Is registration renewal the same as driving licence renewal? No. Registration, or Istimara, relates to the vehicle, while the driving licence relates to the driver. Check the service name before reviewing its requirements or using it.
2. Is valid insurance enough to renew registration? No. Insurance is one requirement; the official page also lists a valid inspection certificate and payment requirements. Automated eligibility verification remains part of the renewal process.
3. Is booking a periodic inspection enough? The published requirement is a valid technical inspection certificate. A booking is not that certificate and does not show that the vehicle passed the inspection.
4. Must I visit a traffic office to renew? The official page describes electronic renewal through Absher without visiting traffic offices. If your case cannot proceed, follow the service message and support guidance rather than assuming a particular in-person procedure.
5. How can I tell that renewal is complete? Check the successful renewal message and then review the registration details. The National Portal lists digital registration display and registration printing as related services; do not confuse accessing the document with carrying out renewal itself.

 

In short, prepare the vehicle requirements, renew the registration through Absher and verify the result. If the process cannot proceed, address the item identified in the message or request official clarification, without assuming fees, deadlines or exceptions that the service does not show.

Car brand logos are the badges and names each manufacturer places on the front grille, the boot lid and the centre of the steering wheel, and the easiest way to learn them is to group them by country of origin: Japanese badges such as Toyota's three ovals, Korean ones such as Hyundai's slanted H, and Chinese brands, many of which spell out their full name in Latin letters, alongside German, European and American badges. In this guide you will find each brand's name as it is written and said, a short description of its badge, its meaning where it is documented, and a table for quick comparison.

What are car brand logos and where do you find them on a car?

A car badge (the logo or emblem) is the trademark that identifies the manufacturer, and it usually appears in several places:

• The centre of the front grille or the bonnet, the most visible spot for the logo.
• The boot lid, where the model name and sometimes the trim are usually written next to it.
• The centre of the steering wheel, the wheel caps and the car key.

Badges fall into two types: a standalone symbol such as a star, rings or a lion, or a name spelled out in letters, as with many American and new Chinese brands, and knowing this difference helps you recognise a car from a distance.

 

What are the best-known Japanese car brand logos?

Japanese badges are very familiar on the Kingdom's roads, and most are simple symbols that are easy to remember:

• Toyota: three ovals that form the letter T; the company says the two overlapping ovals represent mutual trust between the customer and the company, and the outer oval represents the global expansion of its technology.
• Lexus: a curved letter L inside an oval; it is Toyota's luxury vehicle division.
• Nissan: the name NISSAN across a thin circle; the name began as an abbreviation of the Japanese holding company Nihon Sangyo.
• Honda: a wide, upright letter H inside a frame with rounded corners.
• Mitsubishi: three red diamonds meeting at the centre, chosen by founder Iwasaki Yataro because they recalled the emblem of the Tosa clan that employed him and his own family crest.
• Mazda: a stretched letter M shaped like wings inside a circle; according to the company's website, the name is also linked to its founder, Jujiro Matsuda.
• Suzuki: a red letter S with sharp lines.
• Isuzu: the name ISUZU in bold letters; the name comes from the Isuzu River and means fifty bells.

 

What are the Korean car brand logos?

• Hyundai: a slanted letter H inside an oval; the Korean word means modernity.
• Kia: the word KIA in a sharp, angular script; according to the company, the name means rising from Asia.
• Genesis: two spread wings with a shield in the middle; it is the luxury brand of Hyundai Motor Group.

 

Which Chinese car brand logos are common in Saudi Arabia?

Chinese cars have become familiar in the Saudi market, and their best-known badges include:

• Changan: a shape like the letter V inside a circle; the name comes from the Chongqing Changan Arsenal and literally means long-lasting peace.
• Chery: an oval with a symbol resembling the letter A in the middle.
• Geely: the name GEELY is written in Latin letters on the rear of many of its models.
• Haval: the name HAVAL in large letters; it is a brand specialising in SUVs, owned by Great Wall Motor, which is named after the Great Wall of China.
• MG: the letters MG inside an octagon; it is a British marque founded in Oxford and owned today by the Chinese company SAIC Motor.
• BYD: the letters BYD in a bold typeface; the name had no particular meaning, and the company later adopted Build Your Dreams as a slogan matching its letters.
• Hongqi: a vertical red strip running from the bonnet to the grille on many of its models; the name means red banner, and it is the oldest Chinese passenger car brand, owned by FAW Group.

 

How do you recognise the new Chinese car brands?

Many Chinese brands have appeared in recent years, some cannot be recognised from the badge alone, and here are practical ways to tell them apart:

1. Read the written name: many new brands spell out their full name on the grille or the boot instead of a standalone symbol, such as Jetour, Omoda, Jaecoo and Deepal.
2. Know the parent company: Jetour, Omoda and Jaecoo belong to Chery, Deepal to Changan, Haval to Great Wall and Lynk & Co to Geely, and brands within one group may share some models or platforms.
3. Learn what the name means: Jetour combines the words jet and tour, signifying a convenient journey according to the brand; the O in Omoda comes from oxygen and moda means modern, according to Chery; Jaecoo comes from the German word Jäger, meaning hunter, and the English word cool; and Deepal's Chinese name means deep blue.
4. Do not rely on the badge alone: some brands have changed their logo more than once, and its look may differ from one model year to another, so confirm the manufacturer and model on the car's registration card.
5. Check the VIN: its first characters identify the manufacturer, and it is recorded on the registration card and stamped on the car's body.

 

What are the German and European car brand logos?

European badges often rely on old symbols with well-known stories:

• Mercedes-Benz: a three-pointed star inside a circle, which for the original Daimler company symbolised Gottlieb Daimler's aim of motorisation on land, water and in the air.
• BMW: a circle divided into blue and white quarters inside a black ring bearing the company name; its colours recall the flag of Bavaria, while the idea that it is an aircraft propeller is a myth.
• Audi: four interlinked rings, each representing one of the four companies that joined to form Auto Union, Audi's predecessor.
• Volkswagen: the letters V and W inside a circle; the German name means people's car.
• Skoda: a winged arrow inside a circle; the arrow represents speed, the wings progress and freedom, and the eye precision; it is a Czech brand.
• Peugeot: a lion; the original logo was a lion walking on an arrow, symbolising the speed, strength and flexibility of Peugeot's saw blades; it is a French brand.
• Renault: a diamond-shaped lozenge that the French company has placed on the front of its cars since the nineteen-twenties.
• Land Rover: a green oval carrying the name of the British brand.
• Rolls-Royce: two interlocking letters R and the Spirit of Ecstasy mascot on the bonnet; the British company is a wholly owned subsidiary of the BMW group.
• Lamborghini: a raging bull, chosen by founder Ferruccio Lamborghini after he admired the fighting bulls at the Miura ranch in Spain; it is an Italian brand.

 

What are the American car brand logos?

American badges tend towards written names and simple shapes:

• Ford: a blue oval with the name Ford in white script.
• Chevrolet: the gold bowtie, whose origin is unsettled; the company's account says William Durant took it from a wallpaper pattern in a French hotel.
• GMC: the letters GMC, usually in red; it is a General Motors brand.
• Jeep: the word JEEP in plain letters, and many people know it by its grille with vertical slots.
• Dodge: the name DODGE in large letters on the grille or the rear.
• Lincoln: a four-point star inside a frame; it is a luxury brand owned by Ford and named after US President Abraham Lincoln.

 

Car brand logos table: brand, country of origin and badge description

A quick summary of each brand's badge:

Brand	Country of origin	Badge description
Toyota	Japan	Three ovals
Nissan	Japan	Name inside a thin circle
Honda	Japan	Upright letter H
Mitsubishi	Japan	Three red diamonds
Hyundai	Korea	Slanted H in an oval
Kia	Korea	The word KIA in a sharp script
Changan	China	V shape inside a circle
Chery	China	A-like symbol in an oval
Jetour	China	Name in Latin letters
Haval	China	HAVAL in large letters
MG	Britain (Chinese owner)	MG inside an octagon
BYD	China	The letters BYD
Mercedes-Benz	Germany	Three-pointed star in a circle
BMW	Germany	Circle with blue and white quarters
Audi	Germany	Four interlinked rings
Volkswagen	Germany	VW letters in a circle
Peugeot	France	Lion
Ford	USA	Blue oval
Chevrolet	USA	Gold bowtie
GMC	USA	Red GMC letters

 

Frequently asked questions about car brand logos

1. How do I tell the Hyundai logo from the Honda logo? The Hyundai logo is a slanted letter H inside an oval, while the Honda logo is a wide, upright letter H inside a frame with rounded corners.
2. Which car has a horse, bull or lion logo? The black prancing horse on a yellow background is the logo of Italy's Ferrari, the horse inside a coloured shield belongs to Germany's Porsche, the raging bull to Lamborghini and the lion to Peugeot.
3. Is a brand's country of origin the country where the car is made? Not always; the country of origin is the brand's home, and its models may be built in other countries, so check the manufacturing details in the VIN and the registration card.
4. Why do companies change their logos? Usually when they renew their identity, as Nissan, Kia and BYD have done in recent years, so you may see two logos for the same brand on cars from different years.
5. How can I confirm a car's brand if its badge has been replaced? Some owners fit modified badges or the badge of another model, so rely on the registration card and the VIN rather than the badge, especially when buying a used car.

 

Car brand logos become easier to remember when you link each badge to its country and parent company, read the name written on the boot when in doubt, and check the registration card and the VIN before any purchase decision. You can browse the cars available at Saleh Cars Group to get to know the different brands and models.

The difference between the two types of car insurance in Saudi Arabia is that third-party insurance, which is the compulsory insurance, compensates the third party for the physical and material damage your vehicle causes and does not cover your own car, while comprehensive insurance compensates you for damage or loss to your car, including fire, theft, floods and hail, and also includes liability towards third parties. Here we explain what each type covers and excludes as stated in the official documents, what the deductible means, and how to choose the right policy.

What is the difference between comprehensive and third-party insurance in brief?

These are the main differences as stated in the Saudi Central Bank documents; the details follow in the next sections:

Item	Third-party	Comprehensive
Status	Compulsory	Not compulsory; includes third-party liability cover
Physical and material damage to third parties	Covered within the policy limits	Covered as per the unified policy
Damage to your car in an accident you cause	Excluded	Covered after deducting the deductible
Fire, theft, floods and hail	Not covered for your car	Included
Towing your damaged car and storing it	Not provided for	Included up to the amount stated in the schedule
Death or injury of the driver	Excluded	An optional cover offered before the policy is issued

 

What does third-party (compulsory) insurance cover?

The Unified Compulsory Motor Insurance Policy sets the minimum limit of civil liability cover towards third parties. If an accident occurs within the borders of the Kingdom and causes damage that is not excluded, the insurer compensates the third party for what the insured, the driver or the person responsible for the accident is liable to pay for:

• Physical damage to the third party inside or outside the vehicle: death or physical injuries, including total or partial disability, whether permanent or temporary.
• Material damage to property belonging to the third party.
• Expenses borne by the third party due to damage not excluded in the policy.

A third party is anyone who suffers damage that is not excluded, other than the insured or the driver responsible for the accident; so this insurance protects others from your mistakes and does not repair your car. Subject to the exceptions, the insurer may not refuse to compensate the injured party because of a violation committed by the driver, but it keeps the right to recover from them in cases set out in the policy, such as driving against traffic, running a red light, and driving without a licence suitable for the type of vehicle.

 

What does third-party insurance not cover?

Cases the unified policy excludes from compensation include:

• Loss of or damage to the insured vehicle, property of the insured or the driver, and goods carried in it.
• Death or physical injury of the insured or the driver.
• Using the vehicle in races or to test its speed or power, and car drifting.
• A deliberate accident, or giving inaccurate information or concealing material facts in the insurance proposal form.
• Fines and financial penalties, and the driver fleeing the accident scene without an acceptable reason.
• Driving under the influence of drugs or alcohol, and natural disasters such as hurricanes, earthquakes and floods.

 

What does comprehensive motor insurance cover?

According to the Comprehensive Motor Insurance Rules, the company compensates the insured for any risk causing damage or loss to the vehicle, including fire, theft, lightning and natural disasters such as floods and hail, in addition to third-party civil liability as per the unified policy. Compensation works as follows:

• Partial loss: the company bears the cost of repair at the repairing party stated in the schedule (the agency or an approved repair shop), and the cost is determined by the competent entity in charge of motor accident damage appraisal.
• Technical total loss (a car that cannot be repaired to a state legally fit for driving) or economic total loss (repair is costly according to the percentage agreed in the schedule): compensation is the sum insured without deducting the company's expenses.
• The company does not deduct any amount from the compensation for the use or wear of the vehicle before the accident.
• Towing the damaged vehicle and storing it after a covered accident, up to the amount stated in the schedule.
• If another party caused the damage, your insurer compensates you first and then claims against that party or its insurer.

Before issuing the policy, the company must offer you optional covers: renting a replacement vehicle, roadside assistance, death, injuries and medical expenses of the driver or named driver, and accidents outside the Kingdom; any you decline become excluded.

 

What does comprehensive insurance not cover?

The main exclusions in the rules include:

• Driving without a licence suitable for the type of vehicle, or with a licence that was withdrawn or has expired unless it is renewed within the set period.
• Compensation that is less than or equal to the deductible stated in the schedule.
• An accident while the vehicle is driven by someone other than the driver or the named driver.
• Manufacturing defects, and damage resulting from use or from mechanical or electrical malfunctions.
• Damage to or theft of tyres, rims, wheel covers or exterior mirrors, unless it happened at the time of a covered accident.
• Theft caused by leaving the vehicle running, leaving the keys in it, or not closing the windows and locking the doors.
• Accessories not fitted by the manufacturer, unless their type and value are explicitly stated in the policy.
• Car drifting, running a red light or driving against traffic, if the competent body's report proves it caused the accident.
• Driving in desert areas and on unpaved roads unless inside the city.

The company and the insured may agree to waive any exclusion unless that conflicts with the law, so ask about the ones that matter to you before signing.

 

What is the deductible in comprehensive insurance?

The rules define the deductible as the amount borne by the insured for any claim as stated in the policy schedule, and they control how it is applied:

• It is set by the insured in agreement with the company.
• It applies only to damage to the vehicle, not to third-party civil liability claims.
• It is calculated in proportion to the driver's share of liability if they are partly liable, and it is not charged if they are not liable according to the report of the competent body attending the accident.
• It applies once per accident, even if several claims result from it.
• It stays fixed throughout the policy period, whatever the type of accident or the value of the compensation.

In practice, it is what you will pay out of your own pocket in every accident you are liable for, so compare offers by it as well, not by the policy cost alone.

 

How do you choose car insurance that suits your car and your use?

The decision depends on whether you could bear the cost of repairing or losing your car yourself, so review these factors:

• The car's age and value: losing a new or high-value car is harder, and comprehensive cover compensates at the sum insured in a total loss; so make insurance part of your budget as in the new car buying guide.
• A used car: insurance does not cover manufacturing defects or malfunctions, so inspect it before buying and read our vehicle inspection tips before buying a used car, and make sure the sum insured reflects its fair value.
• Financing: if the car is financed, ask the finance provider which type of insurance the contract requires before signing; to compare the two ways of paying, read buying a car with financing or cash.
• Who drives the car: comprehensive cover applies to the insured and relatives such as parents, spouse, children and siblings, the domestic worker or someone working for the insured under an employment contract, and the named driver in the schedule; so add any other driver.
• How you use it: if you go on desert trips, ask about the exclusion of desert roads, and remember that accidents outside the Kingdom are an optional cover.

 

What should you check in the policy schedule before you pay?

The policy schedule is an integral part of the policy, so check:

1. Insured and vehicle details, and match the chassis number and plate with the vehicle registration card.
2. The type of cover, not the marketing name; the rules forbid describing third-party products with additional benefits as comprehensive insurance.
3. The coverage period, with its start and end dates and times.
4. The sum insured, the deductible, and the percentage at which the vehicle is considered an economic total loss.
5. The repairing party (agency or approved repair shop) and the towing and storage cover limit.
6. Named drivers, and the use restrictions and purpose of use.
7. The optional covers you accepted or declined.
8. Additional vehicle details, such as modifications and where it is parked at night, and make sure they are correct; and notify the company of any change in material facts within the set period.

These provisions may be updated, so confirm the latest version on the official website of the Insurance Authority, and the terms of your policy with a licensed insurance company.

 

Frequently asked questions about comprehensive and third-party car insurance

1. If someone else hits me and I only have third-party insurance, who repairs my car? You are the third party under the at-fault driver's policy, so their insurer compensates you for the material damage as per the unified policy. If you are at fault, your policy does not cover your car.
2. Do I need two policies with comprehensive insurance? The rules state that comprehensive insurance also covers civil liability towards third parties as per the unified policy, so it combines both protections in one policy.
3. Is a third-party policy with additional benefits considered comprehensive? No. The rules forbid naming or describing such products in any way as comprehensive insurance, so read the written covers, not the product name.
4. Does third-party insurance cover flood or fire damage to my car? No, it does not cover your car at all, and natural disasters are among its exceptions. Najm requires comprehensive insurance on the vehicle to report an accident caused by natural disasters or fire.
5. Can the policy be cancelled when I sell the car? Yes. Transfer of the vehicle's ownership is one of the cancellation cases under both policies, along with cancellation of its registration and the existence of an alternative policy, and the insured is refunded the amount due for the remaining period according to the calculation method set in the policy.

 

In short: third-party insurance is the compulsory minimum that protects others from damage caused by your vehicle, and comprehensive insurance adds protection for your own car in return for a deductible you agree on. Choose according to your car's value, its financing and how you use it, and read the policy schedule before you pay. If you are looking for your next car, you can browse the cars available at Saleh Cars Group.

Vehicle ownership transfer in Saudi Arabia is done electronically through the vehicle sale service on the Absher platform, without visiting traffic offices: the seller enters the buyer's ID number and date of birth, the agreed sale price and the seller's bank account; the buyer then receives a notification of the request within one hour and accepts or declines it, transfers the price through Absher's secure payment system, insures the vehicle and pays the fees, and once the car is received, checked and the delivery is confirmed on Absher, ownership is officially transferred. Both parties must be registered on Absher, the vehicle registration (istimara), periodic inspection and insurance must be valid, and there must be no violations on the buyer or the vehicle.

What is the vehicle ownership transfer service on Absher?

The Ministry of Interior offers the vehicle sale service through the Absher platform, and the National Platform describes it as a service that enables individuals to sell their private vehicles and transfer ownership electronically after its dues are cleared, after reaching an agreement with the buyer and completing all required procedures, including vehicle inspection to ensure compliance with conditions, registering the vehicle under the buyer's identity, and issuing the vehicle registration license.

• Target audience: individuals, both citizens and residents.
• Service channels: the Absher website and its mobile app.
• Service duration according to the National Platform: immediate.
• Payment method: the car's price is transferred through Absher's secure payment system, and the service page on Absher explains that payment goes to an intermediary account dedicated to the service, which ensures the amounts are documented and the vehicle is received.

Procedures and conditions may be updated from time to time, so confirm the latest steps on the Absher platform or the National Platform before you start.

 

What are the conditions for selling a vehicle on Absher?

Before the seller starts the request, both parties should review the conditions listed on the service page on Absher, as failing to meet any of them may stop the sale:

• Both the seller and the buyer must be registered on the Absher platform.
• The vehicle must be in sound condition and not suspended, lost, wanted or impounded.
• The vehicle registration license (istimara) must be valid.
• The vehicle must have a valid periodic inspection.
• The vehicle must have valid insurance.
• There must be no violations on the buyer or on the vehicle.
• The agreed price must fall within the limits set by the service, and the vehicle must be of a type the service allows to be sold.
• Government fees are paid through the government payment system (SADAD).

The page also mentions limits on the number of vehicles of certain types that a resident may own, so review them on Absher if the buyer is a resident. If the periodic inspection is close to expiring, prepare the car early using the checklist on how to prepare your car for the periodic inspection.

 

What are the seller's steps to transfer car ownership on Absher?

After agreeing with the buyer on the price and other terms, the seller starts the request with these steps, as set out by the National Platform:

1. Log in to the Absher platform.
2. Go to vehicle services, then choose the vehicle sale service.
3. Select the vehicle you want to transfer from the list displayed.
4. Enter the buyer's information: ID number and date of birth.
5. Enter the agreed-upon sale price.
6. Add the seller's bank account details where the proceeds of the sale will be deposited.
7. Carefully review the entered information, then confirm the request.
8. Wait for the buyer's response: the buyer receives a notification of the transfer request within one hour and can accept or decline it.
9. Once the buyer accepts the sale, both parties complete the delivery of the vehicle and the payment through Absher's secure payment system before the transfer is confirmed.

 

What does the buyer do to complete the sale?

Ownership does not pass to the buyer until they complete their steps on the platform, which according to the National Platform are:

1. Review the Absher notification about the vehicle transfer request, and accept it within one hour if you agree.
2. Carefully review the vehicle information and sale price before confirming your acceptance.
3. Transfer the agreed amount to the seller's account through Absher's secure payment system.
4. Insure the vehicle before the ownership transfer is completed.
5. Pay the government fees and the Absher fees.
6. Receive the vehicle and check it, then confirm delivery through Absher.
7. Upon confirmation, the vehicle ownership is officially transferred from the seller to the buyer.

 

How do the seller's and buyer's tasks differ?

The table below summarises the role of each party at every stage of the sale:

Stage	Seller	Buyer
Before starting	Agree on the price and terms, and check the istimara, periodic inspection and insurance are valid	Register on Absher and make sure there are no violations on them
Creating the request	Enter the buyer's ID, date of birth, price and bank account, then confirm	Wait for the Absher notification
Responding	Wait for acceptance or refusal	Review the details and accept or decline the request within one hour
Payment	Receive the price in the bank account entered in the request	Transfer the price through Absher's secure payment system
Insurance and fees	The platform lists no step for the seller at this stage	Insure the vehicle and pay the government fees and Absher fees
Delivery	Hand the vehicle over to the buyer after they accept the sale	Receive and check the vehicle, then confirm delivery on Absher

 

How do you transfer car ownership between family members?

If you are handing your car over to a family member, Absher has a separate service called vehicle ownership transfer between family members, which allows vehicle ownership to be waived between family members electronically once the current owner and the new owner agree. The National Platform lists its steps as follows:

1. Log in to the Absher platform, then select the required vehicle and the service dedicated to this.
2. Select a first-degree family member: father, mother, brother, sister, husband, wife, son or daughter.
3. Enter the confirmation code sent to the new owner's phone.
4. Pay the service fees.
5. The vehicle ownership is transferred to the new owner in the traffic systems after all requirements are met.

 

What practical checks protect the seller and buyer before the sale?

The platform organises the procedure, but it does not replace inspecting the car yourself; the service page on Absher states that the sale takes place after the vehicle has been viewed and inspected and the seller and buyer have agreed. Here are practical tips before accepting the request:

• Match the chassis number (VIN) on the car with the istimara and the vehicle details shown in the request; the article on what the VIN characters mean explains where to find it.
• Inspect the car in daylight and try the engine, transmission, air conditioning and tyres, or ask for a pre-purchase inspection at an independent inspection centre; you will find a wider list in vehicle inspection tips before buying a used car.
• Look for signs of accidents and differences in paint shade between panels, and read what it means when a car has been repaired before you decide.
• Check for violations through official channels such as Absher before starting the request, because the service requires no violations on the buyer or the vehicle.
• Agree in advance on what the sale includes, such as the spare key, accessories and the service record if there is one.
• Keep a private record of the agreement for yourself: the agreed price, the request date and screenshots of the request, and do not share these details publicly.

 

What are the common mistakes in car ownership transfer?

• Starting the request before clearly agreeing on the price and other terms.
• Entering the buyer's ID number, date of birth or the sale price without careful review before confirming.
• Creating the request at a time when the buyer is not available, although the steps ask the buyer to review and accept it within one hour.
• Overlooking the expiry date of the istimara, periodic inspection or insurance until the request stalls after the deal is agreed.
• Transferring the price outside Absher's secure payment system, although the service steps state that payment is made through it.
• Confirming delivery on Absher before actually receiving and checking the car.

 

Frequently asked questions about car ownership transfer

1. Do I need to visit the traffic department to transfer car ownership? According to the National Platform, the vehicle sale service is completed electronically through Absher without the need to visit General Traffic Department offices.
2. How long does the ownership transfer take? The National Platform describes the service duration as immediate; the buyer receives the request notification within one hour, and the sale is complete once both parties finish their steps and the buyer confirms delivery.
3. Who pays the ownership transfer fees? The National Platform lists paying the government fees and Absher fees among the buyer's steps; check their current amount on the platform before you start.
4. Can the sale be cancelled after the request is created? The buyer can decline the request when the notification arrives, and the service page on Absher states that in case of disagreement or unwillingness to continue, the sale can be cancelled before it is completed, according to the stage set by the platform.
5. Does the buyer need insurance for the car? Yes. One of the buyer's steps is to insure the vehicle before the ownership transfer is completed.

 

Transferring car ownership through Absher is a clear process if you prepare for it: check the conditions, agree on the price, inspect the car before accepting, pay through the platform's secure payment system, and do not confirm delivery before checking the car. If you are looking for your next car, you can browse the cars available at Saleh Cars Group.